DIY : Polishing Headlights - huge difference for damaged plastic

Status
Not open for further replies.
THAT IS NOT MY CAR
I will post pics of my work

I used 800 / 1200 / 1600 grit WETSAND paper packs of 5 CDN TIRE ( 3 $ each )
Turtle Wax rubbing and polishing compound 5 $ cdn tire

the end result is wicked
I'll post some when I can
 
before anything
http://img29.photobucket.com/albums/v87/95exrv6/front.jpg

after DIY blackhousing
http://img29.photobucket.com/albums/v87/95exrv6/front2.jpg

close up driver
http://img29.photobucket.com/albums/v87/95exrv6/close_driver.jpg

after wetsand and polish passenger side
http://img29.photobucket.com/albums/v87/95exrv6/passenger.jpg

driver side
http://img29.photobucket.com/albums/v87/95exrv6/driver2.jpg

front after wetsand polish and sanding down the chrome and painting grill
http://img29.photobucket.com/albums/v87/95exrv6/front3.jpg

how it looks now with the JDM corners ( pic was in march kinda salty and dirty )
http://img29.photobucket.com/albums/v87/95exrv6/PICT006824.jpg

gonna take some pics after I install my new suspension *tu*
 
Je remonte un vieux message :bigup:

Je vais essayer ça demain, mais je suis pas sûr d'avoir compris le matériel à avoir exactement.

- Papier sablé 600 / 2000 (que je mets dans de l'eau + savon avant de sabler)

3m Rubbing Compound --> C'est quoi ça ? Comme de la cire ? J'en ai déjà pour l'auto, je peux utiliser la même ?

Plastic polish --> je peux trouver ça chez CT ou Napa ?

Dans le DIY il parle aussi d'un air buffer pour le rubbing compound..c'est quoi ? :p

Merci pour les éclaircissements sur les produits et la technique! (j'suis fort en anglais :eek:)
 
I've been registered on that forum for over a year. I did mine too when I first got my Legend, what a difference!!

I used 320 dry, 600 dry-wet, 800 dry-wet, 1500 dry-wet, 2000 dry-wet, 3M rubbing compound, even waxed it to give it an extra shine and protection. The best product to use is Mothers Plastic Polish after the sanding.

I have pics of a few cars that I've done...
 
I did this also. But I just used 1000 grit paper to sand it (without wetting it) and once i sanded it smooth I sprayed clear coat on it and it was almost perfect
 
Je l'ai fait et ça a un peu amélioré, mais pas tant que ça. Mais moi c'est vraiment l'intérieur est sale, on dirait qu'il s'oxyde un peu..ya même un moustique dedans, je sais pas comment il a fait pour arriver là.
 
Do your guys hand polish or use a buffer machine at the end ? I want to try it :) Since i have some tiny chips on the lens, i will put some clear on it and buff everything at once.
 
Je l'ai fait à la main, ça irait peut-être mieux à la machine, mais le truc c'est d'avoir du papier sablé assez fin (je dirais 2000 min.) pcq moi avec le 1500 , je trouve ça pire qu'avant côté opacité ! Par contre il est tout doux..mais ça on s'en fout. :thefinger Je vais le refaire pour voir..
 
Status
Not open for further replies.
Back
Top