Shock Fini

Status
Not open for further replies.
J

JFK_GSR

New member
Comment on fait pour savoir qu'un Shock est fini, le problème c'est qui est pas installer sinon ca parrait. Comment je peut faire pour le vérifier ...
 
honnetement c le temps que ca lui prend pour revenir en position initiale quand tu le comprime mais ca en prendrais un clean pour comparer..... :dunno:
 
Check to see if there is any liquid coming out of the shock and leaking onto it's tower that's the easiest way. While your at it check the boots too they might be ripped. If you can't tell by the ride difference they might not be blown. But if you get the car on the lift and you see there is liquid leaking down the shock assembly it means its finshed.
 
if no liquid, compress the shock (not upside down) see if it is easy to compress (not that easy) and than if it comes back in place (should)
 
bin tu pousse dessus 3-4 fois pis quand tu le lache ca continue de faire le va et vien 2-3 fois pose toi des question!
 
Status
Not open for further replies.
Back
Top