Wide Works S13

Forgotten

Forgotten

New member
This is my project car, started in 2009 you may have already seen it on other forums. I decided to post it here too because I'm from Montreal and it's always fun to speak with locals!

For the whole project, tons of pictures and news every week check my facebook page:

http://www.facebook.com/wideworksauto

In 2009




Painted the back seat flors black


D-Max roof wing


Black top


Paint Resault (roof wing painting, failded had to restart)


(Ugly Bay)


sr20 removal


s13 stock sr20


Fuck its so dirty


;)


is it gonna work?


looks good


Its comming


Primed


Painted Black


sr20 inside (new black valvs cover)


New Pignose Lip & Pannasport G7 Wheels


240sx on Pannasport G7


Nice Ass :)


Sr out again after a full sumer drive


I like this picture!


Needs a wiretuck ''SOON''


New sr20det s14a (kouki 1997)
Cams Brian Crower 264in/264ex
Valves Spings BC
Ti Retainer BC
Tomei Rocker arm stopper
Custom Turbo Manifold
Turbo Garrett gt2871r a/r.64
Injecteurs HKS 740cc
Thermostat Nismo
ACT 6 pucks clutch wheel
ACT heavy duty pressur Plate
Short Shifter
310hp/290torq (mustang dyno on 91octan gas)


Inside the car


Wire tuck almost finish


Got some s15 seats


Motor out again, it was to dirty...


Cleaned !!


...


New SPL arms


Powder coated valv cover


My girl friend and the new tyers for what's comming ;)


???


:)


Wide as fuck


Whells work vs-xx (front/18x10.5 -36) (back/18x12 -29)
Tiers Bf Kdw (front-225/40/18) (back-265/35/18)


Fitting Loll


The last picture is in june 2012 project still going, i will update more!
 
Last edited:
We tried on my friend's car to see how its fitting with the 70mm kogouchi overfenders, -3 camber, shit its wide


Sometimes i am wondering if its not to wide!


Girlfriend working hard, Lol


The gray thing is plasticine


This is mold release agent


Doing fiber glass, making the first mold


First mold


The Overfender, made a mistake by putting plasticine to do the little line in the fender


Repairing my mistake


Evercoat finition putty


Me sanding


The flare was awful, at this point i was wondering if i could make something look perfect, i spent hours and it was still not good...


Try harder they say


Some kind of a flare mold


Looks way better


Finaly over


Plasticine


Looks good so far


Forgot the gas tank hole lol


Fiberglass


The mold


right side is still the mold


fiberglass in the mold


now this was bad, I was hurry when I did the fiberglass in the mold so I did some steps wrong, I put too much realest agent and didn't wait for it to dry properly, that made my fiberglass never came dry, it staid wet and soft.
so I had the idea too wash them, put them back together and put fiberglass resin inside the overfender that way it will become hard, it worked, happy endings this time


finaly right side is done


side view


finition putty


both sides


had to cut the flare again, the car si 2cm higher on the right side i never saw it and now i'm paying for it :(


weight reduce lolll


flare mold


flare mold


fiberglass


a ruff unmolding


its gonna fit proprely


new flare


couple of hours later


ass






 
This is turning out to be quite epic!

Anxiously waiting to see whats gonna happen to them front fenders...

Mad props for a mad S13 *tu*
 
wow!! ca c'est le style de projet que j'adore!!!

une seule question par contre, t'as pas peur de craquer tes fenders si jamais tu frappes une bonne bosse? les roues sont hyper proche me semble. à moins bien sur que tout soit calculé et que la roue entre vers l'intérieur sous les bosses.

lâche pas!!! super projet!!
 
I don't like the wheels, but sick project! You seem to have a lot of skills in what you do, congrats for the whole thing!

I'm a friend IRL of the twins, with the kogouchi overfenders! ;)
 
frankzxz said:
mad skills xd props
Click to expand...

MontrealB15 said:
Wow very nice! Anxious to see how it looks finished
Click to expand...

Jayrem said:
Good job Paul !
Click to expand...

Lt_Crazy said:
nice project! love the wheels!!!
Click to expand...

jerm__ said:
very nice work so far.
Click to expand...

Thanks guys, I appreciate it!!

sgsr20 said:
This is turning out to be quite epic!

Anxiously waiting to see whats gonna happen to them front fenders...

Mad props for a mad S13 *tu*
Click to expand...

Same as the rear ;)

@cUr@-TL said:
Nice job cleaning everything up. *tu*

However, the wheels just don't fit, way too wide...
Click to expand...

Yep i tried the best i could and the wheels are wide i know but they will fit!

vdub 007 said:
wow!! ca c'est le style de projet que j'adore!!!

une seule question par contre, t'as pas peur de craquer tes fenders si jamais tu frappes une bonne bosse? les roues sont hyper proche me semble. à moins bien sur que tout soit calculé et que la roue entre vers l'intérieur sous les bosses.

lâche pas!!! super projet!!
Click to expand...

Oui tout est calculer, a date ca ne frotte pas. Tu vas voir les ailes finales sont beaucoup plus propre et flexible.

Flames said:
I don't like the wheels, but sick project! You seem to have a lot of skills in what you do, congrats for the whole thing!

I'm a friend IRL of the twins, with the kogouchi overfenders! ;)
Click to expand...

I tried, but can't satisfied everyone :)

Dubstep said:
That S13 is clean.
Click to expand...

Not that bad but too rusty
 
You must log in or register to reply here.
Back
Top