My FD3S Build

sNAKE1337

New member
Hey Guys, so ive been working on my fd for a little while things going on slowly so i'll make a build thread
the setup i want for this summer is Non-sequential twin turbos 14psi setup.
i will need :
new turbos
264337_10150212188434531_508194530_7278501_2589655_n.jpg

1680cc Injectors + Secondary Fuel Rail and blablabla
attachment.php

3" FEED Downpipe
423346_10150544223174531_508194530_9129351_568783879_n.jpg

dont hate the rust, it will be sandblasted + Jet coat + heat wrap

since i will pit it in non-sequential the vacuum lines gonna be deleted so moar space = more airflow = less hot
also gonna get a Greddy FMIC + Koyo Racing Rad
And the most Important Thing = APEXI POWER FC + Boost Controller\
Will also need a Fuel Pump, prolly gonna get a supra twin turbo OEM

so right now i have started removing the turbo's
426170_10150526387769531_508194530_9075791_1828956277_n.jpg

402423_10150528857559531_508194530_9081235_1312206723_n.jpg

FD3S EPIC VACUUMS
423243_10150528858714531_508194530_9081244_546372262_n.jpg

The Turbo + the turbo heatshield
426543_10150529937409531_508194530_9084127_1084743922_n.jpg

Downpipe Out of the way
425740_10150531104534531_508194530_9087363_866254176_n.jpg

one more thing before i remove the turbo's , i've removed all the bolts on the manifold but now i need to empty the oil of the car and the prestone because turbo lines are connected to it, once that is done turbo's are coming off!
A little special delivery from prosport :) already have the boost gauge, here is the water temp ( because stock FD water temp is a POS) And Oil Temp
Next ones are gonna be air fuel ratio and Fuel Press and Oil Press.
420090_10150561510624531_508194530_9176486_1280409084_n.jpg



All the updates will be posted here!
430103_10150543873274531_508194530_9128788_1308261197_n.jpg
 
Last edited:
im also removing water bypass in the throttle body and the 2nd butterfly in the Intake Manifold (+10hp LULZ)
also removing Air pump because im gonna be running straight pipe so Airpump delete + greddy pullet kit , should gain around 10hp lool
estheticaly, the car is going to be wrapped black matte and i will repaint the wheels, gonna make it look nice but first im focusing performance wise!
 
418972_10150584815074531_508194530_9247720_589038201_n.jpg

no more turbos in the bitch, shes N/A! jk never this will be NA unless its a 4 rotor
427049_10150588697554531_508194530_9262931_1602221280_n.jpg

The Injectors + fuel rail + FPR
419477_10150613478214531_508194530_9350152_858879775_n.jpg

my sapin de noel
419928_10150615733289531_508194530_9357884_913626039_n.jpg

Getting everything ready to put back together, should be ready by monday or tuesday.
there will be a video of highway pulls once its Tuned :D
 
Omfg that engine bay, so cluttered... Good luck man, if you got this thing cleaned up a bit she'd be a definite show stopper!
 
yeah had a crack in my oil filler neck so when i was going full boost on the highway there was oil fume going all over the engine bay, its fixed now all good and shes clean too now
 
Not even so much the mess and the shit everywhere... Busy as fuck!

You need new wheels man, stock a la cacanne = for red honda civics only
 
Not even so much the mess and the shit everywhere... Busy as fuck!

You need new wheels man, stock a la cacanne = for red honda civics only

dequoi stock a la cacanne?cest des OZ Racing Forged Wide as fuck rims
275/40/ZR17 in the back and 245/45/zr17 in the front, whats good?
oh and dont mind the mess in the engine bay its normal its getting worked on, i'll post a pic of how it looked before all this work you can judge by yoself
 
Last edited:
Ah, I was sure they were stockers! 'Scuze moi d'abbord! I still love the car, never even seen it in person though...
 
cest correct el gro jte pardonne
this is my rims
310413_10150327160589531_508194530_8229546_2417582  61_n.jpg

engine bay
89b19756.jpg

it was dirty because of my turbos oil leak and oil filler neck. now its cleaner!
dbea5f87.jpg
 
Back
Top