Selling A1 Rabbit GTI and many many parts!!!

Status
Not open for further replies.

Dub1

Legacy Member
Hi everyone earlier I posted a small blurb of a message and I apologize for the lack of details...i just wanted to know if there are enough people that were looking for rabbit parts in the mtl area...

Ok so this is the deal.
I'm selling my car and the parts car that I chopped up with an additional 1.8L JH motor. As you can see there are a whole lot of spare parts.

A)
1983 Rabbit GTI with 205,000 KM's, White, tinted windows, car runs perfectly.
Mods and Repairs include:
-sport suspension
-Neuspeed Upper front strut tie bar
-new exhaust with straight pipe
-all new brakes with painted front calipers (blue)
-new master cylinder
-windshield gasket re-done by lebeau (doesn't leak)
-stereo system not complete. Old alpine radio with 6x9's in the back.

little anoyances:
-body has slight rust
-brakes might need a slight bleeding

This is a great car for an enthusiast or a project car...because of all the parts that are included....


B)

1 - Full stock suspension + bump stops + strut bearing
1 - Back left taillight assembly
2 - Bosch halogen fog lights
1 - passenger side seatbelt fastner
1 - drivers side mirror shattered but assembly in tact
1 - passenger side mirror completely in tact
1 - GTI front emblem
2 - Reverse light assembly covers
1 - back seat ashtray
1 - dash mounted ashtray
1 - duct for heating system
1 - 84 GTI close speed transmission
1 - headrest for front seat
1 - passenger front seat complete with headrest
1 - complete backseat bench
1 - engine coolant reservoir with hose
2 - steel hoses for the cooling system
1 - engine mount
1 - anti-freeze container
1 - complete air filter assembly
1 - mint original VW jack (84 GTI)
1 - Flywheel (+ rusted clutch)
2 - valve covers
1 - fuel filter
1 - timing belt cover
1 - pressure plate
1 - original exhaust manifold
2 - alternators (one is working one the condition is unknown)
2 - passenger arm rests
1 - transmition plate cover
1 - bosal semi cat-back exhaust
1 - sunroof visor
2 - oldschool zender side skirts (Really nice on rabbits)
2 - rear side light reflectors
1 - oil pan
1 - performance exhaust manifold (80 Rabbit)
1 - ported intake manifold
1 - stock intake manifold
1 - stock GTI block
2 - 86.4mm crankshaft
1 - solid lifter head
1 - regular hydrolic lifter head (both might be messed up not sure)
1 - pulley for crank
1 - dipstick + used straps and spark plug wires
1 - oil sump
1 - starter rebuilt used 1 month
1 - S pipe for intake
1 - slightly used clutch
1 - flywheel + pressure plate
1 - polished and painted cylinder block
all engine internals + associated gear, very clean
1 - mint polished and painted oil pan
1 - left hand side, seat rail moulding for passenger side seat
1 - Extremely mint & slightly used SACHS clutch
1 - painted cam pulley, very clean
1 - crank shaft pulley + many other pulleys
- misc used but clean pistons
1 - complete GTI wiring harness
with miscellaneous relays
1 - 84 throttle body
2 - complete oil pump
4 - stock 14 inch Rabbit aluminum wheels
2 - 6x9 prestige speakers
1 - stock 84 GTI antenna
SOLD - AllOUT race header slightly used and in awesome condition with fitting for oxygen sensor

a whole bunch of additional parts that i probably forgot to include......if you want just post or email and i'll see if i have it.....

Also can get you all the gaskets needed to rebuild the motor From A to Z for an extremly reasonable price!

Im asking 3000$ negotiable for the car and all the parts which would be deal A
If not i'll have to resort to deal B where ill sell the car and the parts seperate...if you're interested in

either deal please email all offers to nsped@yahoo.com
 
Last edited:
Originally posted by Dub1



I checked my PM nothing there...:dunno:

Oh sorry I think I e-mailed your Yahoo aco****?
Anyways, I need the front suspension, plus some more possibly.
I have to see what I need?
Thanks.
Oh and possibly the exhaust system.
You know if this stuff fits 1990 Cabriolet?
 
What type of front suspension (shocks & springs) do u have, how many km's and how much do u want?

Thanx
 
4x4Dakota, in limbo,

Did you guys get my PM's? Please let me know 'cause I know 4x4Dakota mentioned he sent me one but I never got it.

Thanks
 
in limbo I sent you an email

4x4 dakota I'm guessing you didn't get my PM's either I think I'm having a problem with PM'ing anyway if you like you can just give me your email address and I'll send you the details.
 
Last edited:
yu

cabgarage.jpg


are these your side skirts if so how much?


and what code is your tranny whats the condtion?
and how much u want for it
 
Originally posted by futurayellow
cabgarage.jpg


are these your side skirts if so how much?


and what code is your tranny whats the condtion?
and how much u want for it

Tranny: Not sure of the code I'll check this evening. The tranny is in very good condition and it was sick when it was installed!

Skirts: No they're not. You can see a pic here if like but they've been sold.

http://dub1.freeservers.com
 
Last edited:
Is nobody here interested in a Rabbit and rabbit parts??? Everything I've got MUST go!!!
 
Status
Not open for further replies.
Back
Top