Autoxtrem VW Drag car!

Status
Not open for further replies.
E

euroroccoT

Shop Representative
Well we decided to build the drag car again, after i parted it all out for personal reason. the guys at shop decided to support me again with the second full build up in just over 1 year.

CAR MADE 608WHP 510FT/LBS@32PSI BASE TUNE

Fully built 2.0 20v
Aeg Crank
wiseco piston
Scat rods
Fully ported polish AEB head by Tkrace.com
Full Supertech valvetrain( SS intake valve, Inconel exhaust, Titanium retainer, HD springs, Valve lock)
Cat Cams
Full racecraft SS equal lenght manifold
Bullseye S362 .70a/r V/band 700WHP turbo
Tial 44mm WG
02J tranny with peloquin
BFI stage2 motor mouns
Bully stage5 clutch kit with solid 4 puck disc
lightweight flywheel
Aluminium rad with 10" fan
custom axles
custom Autoxtrem CAD design Water/air intercooler (design by our own Piston Pete)
Custom autoxtrem Intake manifold
S4 TB
Custom autoxtrem fuel rail
1000cc injectors
custom Eurodyne.ca software
ME7 ECU
Aeromotive a1000 fuel pump
RCI 1 gallon fuel cell
Odyssey light weight batterie
Full Hotbits coilovers with custom valving and spring rate
urethane all around
10 roll cage
custom dash with stewart warner gauges (40psi boost, oil psi, water temp, oil temp, volt
Aem wideband
lexan windows
Weld magnum 13x9 on 24.5x9x13 mickey thompson fronts
Weld magnum 15x4 on 24.5x4x15 rear skinnies
Kirkey seat
Autometer prolite shift light
G-force 5 point cam lock harness
G-force safety net

Still working hard to finish it early february so watch for results soon and come support us at the track.

still not finish but you get the idea
DSC00882.JPG


IMG_1020.jpg

IMG_1021.jpg

IMG_1019.jpg

IMG_1018.jpg


Gt32r/40 VS S362

IMG_1016.jpg

IMG_1017.jpg

IMG_1013.jpg

IMG_1011.jpg

IMG_1008.jpg

IMG_1005.jpg

IMG_0984.jpg

IMG_0983.jpg


with old rims

IMG_0920.jpg
 
Last edited:
Because it's Harder*tu*

here is our Custom made CAD design Air/ice Intercooler:yikes:

IMG_1040.jpg

IMG_1041.jpg

IMG_1039.jpg

IMG_1037.jpg


goes around the pump keeping it cool under xtrem conditions
IMG_1036.jpg
 
non on vas juste mettre de la glace ordinaire dedans, avec un drain en dessous pour enlver l`eau apres les runs, l`air temp vas etre tres constante a haut boost et aussi quand il fera tres chaud dehors
 
le moteur a besoin d'etre chainner solide....
le turbo va tapper sur le firewall pis ca va faire des fuite du gasket....
c'est quoi ton remede... des bushing ultra stiff ou ben............
 
inquite toi pas le moteur bouge pas, motor mount bfi stage2 plus brace souder sur frame/moteur. Si il touche le firewall, je vais sortir outils special.. Marteau

nous allons faire les evenement a napierville, et pour les temps, j`ai une idee mais nous allons faire des essais et nous y irons de l`avant apres. une chose a la fois 10s en premier et apres..
 
Gros MErci a Tom de Tkrace.com pour une autre Tete de qualiter

photobucket me done des troubles avec les pics... bientot
 
euroroccoT said:
Gros MErci a Tom de Tkrace.com pour une autre Tete de qualiter

photobucket me done des troubles avec les pics... bientot
Click to expand...


I don't post here but I will say WOW nice Marc well done.
I'd like to thank you and Chris Tapp for working and choosing me*tu*
Happy and proud to be part of this project.

Keep it up les boys:beer:
 
Status
Not open for further replies.
Back
Top