BLKGTSTANG
Legacy Member
I have a Crane 2031 camshaft for a 85-95 5.0 Mustang that I am selling. It is $199.00 new, selling it for $110+shipping. Still in the original box with card. It is made for use with the 1.7 rockers, but can be used without them.
Part Number: 444225 Grind Number: POWERMAX 2031 (FORMERLY COM
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1985 Up FORD-MERCURY 8 GOOD MID-RANGE TORQUE AND HP, DESIGNED FOR USE WITH 1.7 RATIO ROCKERS AND MASS AIRFLOW STYLE F.I. ENGINES WITH AFTERMARKET INTAKE, HEADS, EXHAUST AND CENTRIFUGAL STYLE BLOWER BENEFITS BEST: 5-SPD OR AUTO W/MILD STALL CONVERTER. (50 STATE LEGAL 85-93, C.A.R.B. E.O. D-225-46) BASIC RPM 2000-5500
Engine Size Configuration
302 C.I. V
Valve Setting: Intake .000 Exhaust .000 HOT
Lift: Intake @Cam 302 @Valve 513 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 311 @Valve 529
Rocker Arm Ratio 1.70
Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 28.0 BTDC 68.0 ABDC 276 °
Exhaust 75.0 BBDC 27.0 ATDC 282 °
Spring Requirements: Triple Dual Outer Inner
Part Number 99841
Loads Closed 113 LBS @ 1.950 or 1 61/64
Open 328 LBS @ 1.450
Recommended RPM range with matching components
Minimum RPM 1400
Maximum RPM 5400
Valve Float 6000
Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 0.0 BTDC 34.0 ABDC 107 214 °
Exhaust 47.0 BBDC (7.0) BTDC 117 220 °
Remarks:
FIRING ORDER: 1-3-7-2-6-5-4-8 FOR USE WITH 1.7 RATIO COBRA ROCKER ARMS.
Part Number: 444225 Grind Number: POWERMAX 2031 (FORMERLY COM
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1985 Up FORD-MERCURY 8 GOOD MID-RANGE TORQUE AND HP, DESIGNED FOR USE WITH 1.7 RATIO ROCKERS AND MASS AIRFLOW STYLE F.I. ENGINES WITH AFTERMARKET INTAKE, HEADS, EXHAUST AND CENTRIFUGAL STYLE BLOWER BENEFITS BEST: 5-SPD OR AUTO W/MILD STALL CONVERTER. (50 STATE LEGAL 85-93, C.A.R.B. E.O. D-225-46) BASIC RPM 2000-5500
Engine Size Configuration
302 C.I. V
Valve Setting: Intake .000 Exhaust .000 HOT
Lift: Intake @Cam 302 @Valve 513 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 311 @Valve 529
Rocker Arm Ratio 1.70
Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 28.0 BTDC 68.0 ABDC 276 °
Exhaust 75.0 BBDC 27.0 ATDC 282 °
Spring Requirements: Triple Dual Outer Inner
Part Number 99841
Loads Closed 113 LBS @ 1.950 or 1 61/64
Open 328 LBS @ 1.450
Recommended RPM range with matching components
Minimum RPM 1400
Maximum RPM 5400
Valve Float 6000
Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 0.0 BTDC 34.0 ABDC 107 214 °
Exhaust 47.0 BBDC (7.0) BTDC 117 220 °
Remarks:
FIRING ORDER: 1-3-7-2-6-5-4-8 FOR USE WITH 1.7 RATIO COBRA ROCKER ARMS.