FS: Final Konnexion R32 RB25DET Skyline Show Car (403 WHP) *Picture Intensive*

Status
Not open for further replies.

604CEFIRO

New member
Hey Guys,

I've lowered the asking price on the car to hopefully have it sold in the next few months.

Posted on eBay: http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=220140776351&ssPageName=ADME:L:LCA:CA:31



Here is the old for sale thread if you want a brief Build History on this vehicle:

http://forums.gtrcanada.com/showthread.php?t=20900&highlight=final+konnexion

Please visit here for pictures:

New Pictures
http://www.pbase.com/suomyairsoft/skyline07

Past Pictures (Build progression, engine bay etc):
http://www.pbase.com/suomyairsoft/finalkonnexionr32



Asking Price: $25,000
Contact:: Via PM or wong.will@shaw.ca or at will@styleautoboutique.com




LIST OF MODIFICATIONS

Car Make: Nissan
Car Model: R32 GTS-T Chassis
Power Options: Power Windows, Power Mirrors, Power Door Locks, Power Steering, Air Conditioning, Rear Window Wiper, and among others I might have missed
Mileage: 96,xxx KM’s


Engine & Driveline:

Dyno’d & Tuned by Kinetic Motorsports: 402.8WHP @ 14PSI / 1 Bar (Currently using 1 Bar wastegate spring)

RB25DET Swapped from an 1994 R33
MINES Tuned 300ZX Z32 TT ECU
ATS Twin Plate Carbon Type R Clutch
- Keeplabs Reinforced / Welded Clutch Pedal Bracket
Aeromotive Fuel Pressure Regulator
Aeromotive Liquid Filled Fuel Pressure Gauge
Greddy Hi Polished Intake Manifold
Greddy External Oil Catch Can
HKS SSQV BOV
HKS Type S Front Mount Intercooler
Genesis Racing Battery
Garrett GT30R Ball Bearing Turbo Hi Polished
- GT30-11 with a .64 A\R
SPLITFIRE Ignition Coil Packs
Tial Wastegate 38mm
- Externally Dumped with Custom Screamer Pipe
Tomei Short Shifter
Custom Top Mount Stainless Steel Exhaust Manifold
Kinetic Motorsports 440CC Injectors
Keeplabs Custom made Billet Top Feed Fuel Rail
Keeplabs Custom 90mm Q45 Throttle Body
Keeplabs Custom made One Piece Driveshaft
Keeplabs Custom made full Intercooler Piping
Keeplabs Custom made 3” Downpipe (Heat Wrapped – 1 02 bung, 1 extra bung for Wideband)
Keeplabs Full AN Fittings,
Keeplabs Custom Stainless Braided Fuel System
Keeplabs Custom made “Dropped Down” Aluminum Battery Tray
Keeplabs Custom “Hidden” Fuzebox
Keeplabs Custom “Hidden” Z32 Air Flow Meter (Looks like it’s running Standalone with NO AFM)
Keeplabs Custom Fender Wire Tuck (Prevents shredding wires due to extremely low ride height)
Keeplabs Custom made Turbo Inlet Pipe w/ K&N Race Filter
Keeplabs 3" Stainless Steel Catback Exhaust
- 3 Inch Straight Through From Turbo
Walbro 255 Fuel Pump
Wonder Hicas Eliminator
Removed: Hicas and All Associated Lines / Hardware

Suspension & Wheels:
ESSENTIAL Subframe Metal Bushings
Tein HA Coilovers (Can be substituted for 5000km new Cusco Zero-2 Coilovers; trade + cash)
Mines Front Strut Bar

WORK VS-KF
- Custom Rivet Color (Black)
- Custom Gold & Black WORK Centre Cap
- 17x10 front
- 18x10.5 rear
- Kumho Ecsta SPT
- 225/45/17 Front
- 235/40/18 Rear
WORK lugnuts
WORK Valve Stem Caps

Electronics & Interior:

Apex'i SAFCII
- Keeplabs Custom Mounted in Glovebox
Apex'i AVC-R Boost Controller
- Keeplabs Custom Mounted in Glovebox
Compustar Pager Alarm System ( Immobolizer + other goodies)
CUSCO Safetly 21 7 Point Roll Cage
DEFI BF Series Boost Gauge
DEFI BF Series Oil Pressure Gauge
DEFI BF Series Water Temp Gauge
DEFI Controller Unit II
- Keeplabs Custom Flush Mounted in Dash
Focal Speakers All Around
- Doors and Rears
JIC MAGIC Red Alcantara Seats (x2)
- Momo Sliders (x2)
- Keeplabs Custom made Low Mounting Brackets (x2)
Pioneer AVIC-D1 Navigation
Takeda Custom Black Leather / Red Stitching Shift/E-brake Boot
Nardi Perferated Leather “DeepCorn” Steering Wheel
Nardi Classic Shift Knob

Body/Exterior/Lighting:
BlitzGear Pin Stripe Graphics
BlitzGear “Keeplabs” Crest Graphics
PRIME HID Kit 7000K
Paint Job Color: Tri-stage Alsa Corp Ice Pearl Black
Keeplabs rolled / pulled fenders
- 30+ mm over
Final Konnexion First Contact Front Bumper
Final Konnexion First Contact Side Skirt
Final Konnexion First Contact Rear Bumper
GTR Aluminum Hood
GTR Grill


Asking Price: $28,000CAN
Contact:: Via PM or wong.will@shaw.ca

Parting Out: At this moment, no parting out. If an interested buyer does not want the following, I can adjust the price: JIC Seats (seat, rail, and mount), Pioneer AVIC D1 Navigation, Nardi Steering Wheel, WORK VS-KF wheels.

Stock pieces would be replaced if the parts are removed.

Trades; Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES.
 
Last edited:
49889675.jpg


Exterior

67910561.jpg

69820398.jpg

62522097.jpg

62522018.jpg

66673186.jpg

67903017.jpg

67903010.jpg

48093350.jpg


Interior

67902985.jpg

48093352.jpg

67902990.jpg


Engine

67902965.jpg

66673207.jpg

55544039.jpg

43554409.jpg

43554408.jpg

43554407.jpg

43554410.jpg

43554406.jpg



Misc Pictures:

The very beginning:
33928026.jpg


Mid swap:
42053851.jpg


Old Paint & Rims:
44830212.jpg


Day I got my rims:
47471562.jpg
 
WWWWWWWWWWWOOOOOOOOOOOOWWWWWWWWWWWWWWWWw!!!! CRAZY CAR!!!!! SICK!!!!!!!!!!!!!! GOod luck with your sale!!!
 
Status
Not open for further replies.
Back
Top