sr20det dans nx 1600

Status
Not open for further replies.
$

$pider

Legacy Member
ya du fittage de fils à faire ?

parce que j'aimerais bien faire le swap cette hiver..
pour avoir un char qui avance ;)

c'est dur à faire?
des conseilles ou commentaires ?
merci
 
va t'acheter une NX2000 accidenter pis va voir S14 Drift pour ton fillage pis ton ECU. J'ai fait ce genre de swap il y a 2 ans mais ds un 200 SX avec le GA16DE pas mal chiant comme swap quand ta pas une voiture de spare pour les piece
 
à mtl ca s14 drift ?
ca peut couter combien environ pour fitter le fillage ?
pourquoi pas prendre une 1600 ?
c'est asser rare comme véhicule...
et j'suis pas trop caroserier lol
j'peux pas vraiment me prendre une nx2000 trop cabosé ;)
 
S14 Drift c son nick sur montrealracing son nom c Robin. La NX2000 c pour les piece. Et oui c rare donc les piece aussi vont l'etre aussi. Prepare toi un bon budget pour faire ca. Environ 7000-8000$ pour faire un bon swap pis dependant de ce que toi tu fait.
 
ben le moteur je l'ai pour moins de 2000 $ livré
auto 1200-1300..

j'essayerais de faire le swap moi même et callé quelqu'un pour le fillage et le truc de pro..

j'y mettrais une suspension très dur et ca serait tout.
j'veux pas que ca me coute 7000-8000..

qu'est ce qui couterais cher selon toi ?

merci de tes commentaires :)
ceux des autres serait aprécié
c cher les pièces de nissan ?
genre brake, conduite, mécanique ?
 
Where in the world did you get $7-$8k for this swap into an NX2000??? It bolts right in, and i believer the wiring is a snap. As far as I know, it's the easiest car to drop an S13 into! Only prob is that S13s are older engines, and there were never any S14 AWD cars made.

This is what I plan on starting up next sept or Oct.
 
i think that sr20det are 91-95 engine and nissan nx was made in 91-9x..
it don't look like older to me AudioAltima
How much you plan to pay for a swap like this for your car ?

Acceleration sould be sensational in a lil Nx ;)
 
AudioAltima said:
Where in the world did you get $7-$8k for this swap into an NX2000??? It bolts right in, and i believer the wiring is a snap. As far as I know, it's the easiest car to drop an S13 into! Only prob is that S13s are older engines, and there were never any S14 AWD cars made.

This is what I plan on starting up next sept or Oct.
Click to expand...

What what what. Where talking about a 1600 not a 2000. buddy i did that swap and if you think it's easy dream on. The GA16DE harness,tranny,axle,throtle body,fuel pump some sensor... are all different from the GA16DE to SR20DE. If your where planning to do that swap next month search they internet call Alex from Automotion talk to Robin if you think it's bolt on you way wrong
 
Voila ce que j'ai poster sur www.npclub.com apres mon swap. Il te faut tous ces pieces car il sont pas compatible entre ta NX1600 et NX2000.

Transmission
Clutch
Pressure plate
Drive shaft
Braket du support du drive shaft passager
Radiateur
Motor Mount
Distributor
Throtole body
MAF
Hose a radiateur
Heater hose
Wiring harness (Ou en faire un custom par Automotion)
Flywheel

Dans ma 200 SX tous les supports du moteur ou été modifier sauf un ainsi que le cross member. Il y a aussi un autre sensor qu'il faut changer mais je ne me souviens plus du nom.

Apres que le DET est dedans. Ben la si tu veux tu peux le mettre front mount ou tu fais une trappe sur le hood pis ta ton exhaust. Moi je te donne un conseil reseigne toi correctement pis parle a ceux qui l'on deja fait pas. Si non tu vas avoir des petites surprise.
 
AyrtonSennaD said:
What what what. Where talking about a 1600 not a 2000. buddy i did that swap and if you think it's easy dream on. The GA16DE harness,tranny,axle,throtle body,fuel pump some sensor... are all different from the GA16DE to SR20DE. If your where planning to do that swap next month search they internet call Alex from Automotion talk to Robin if you think it's bolt on you way wrong
Click to expand...
wow... relax bud. Actually, I've talked to MANY people about this swap. And if you look above, it was you that brought up the NX2k. I figured you were still talking about that. I know the people you're talking about, but why should I go and jump the gun and start hitting them up with questions now? I'm only planning this in Sept. or Oct. Those that know me, know that I am serious about it as well. I don't often back out on these things, but there is no point in me wasting someone's time at the moment. I'm also planning to do things the right way. So far I know of only ONE person who has had their swap last ... most don't make over 10k kms... You don't think I'm gonna be researching this a project a bit after hearing this. Even Alex had ALOT of problems with his. The swap itself can be done fairly cheap into an NX2k, but if your gonna want it to last, i'd suggest opening the sucker up and fixing anything before you drop it in.

Anyways, I don't care if you're talking about the NX1600, you brought up the 2k, so I just threw in my 2 cents. Anyways, relax a bit, this is a discussion board... no offence, but this is why I don't goto npclub.com ... I'll goto the meets, but I don't like people that over react for nothing!
 
AyrtonSennaD said:
If you say so your a moderator so i can say nothing right. And you before reply in a thread read all the post
Click to expand...
Dude.... not 2 threads above me, you brought up buying the NX2000...

Anyways, I just re-read... I may have posted about the NX2000, but this still goes to show the way npclub.com people react. Which is exactly why I don't visit that site anymore. And just cause I'm a mod has nothing to do with you not being able to say anything... I just took offence to your tone in your answer!
 
AyrtonSennaD said:
va t'acheter une NX2000 accidenter pis va voir S14 Drift pour ton fillage pis ton ECU. J'ai fait ce genre de swap il y a 2 ans mais ds un 200 SX avec le GA16DE pas mal chiant comme swap quand ta pas une voiture de spare pour les piece
Click to expand...

I said buy a NX2K smash for the piece
 
Spyder si tu veut faire le swap dans ta 1600 Ayrton a afficher les pieces que tu a besoin . Pour ta couette, si ca t'interesse ont peu te la faire avec l'original .Et si tu n'est pas trop presser et que tu veut pas faire le swap toi meme PM moi.
 
ideallement trouve toi une nx2000 a la scrap avec toute la mecanique tu aura tout ce que tu as besoin comme:
transmission
clutch et flywheel
cardan et half shaft
support a moteur
maf
fillage moteur
radiateur et hose
et beaucoup de piece de remplacement pour le reste du char
 
Status
Not open for further replies.
Back
Top