Allgo_Noshow
New member
i'm selling my first gen like the title says. reason, other projects not enough money for all of them! i work at laminar so you know the work is done properly.
1991
165*** km's
5spd
awd tsi
anti rust each season
very clean
oil changes
-diff and transfer case (redline heavy shockproof)
-tranny (b&g synchroshift)
always run 94 octane from petro
new parts:
rad
all wheel bearings
both outer tie rods
front ball joints
kyb gr-2 (front)
altenator
mods:
eprom ecu
act 2600 clutch kit (about 5000 km's)
custom 3' turbo back
-vibrant stealth muffler
-2 moroso race bullets
-dejon tool 3' down pipe w/ wastgate dump
twin slimline electric fans
powerslot rotors
hawk pads
17' adr mags w/ hankook ventus 225/45/17 80% tread remaining
urathane front bushings
k&n fitler
custom intercooler piping(cold side)
new pioneer sound system(worth 1000)
extra parts included
stock rims w/ tires
new winter tires(toyo 90% tread left)
2 usable tranny cores w/ transfer cases
the bad
missing molding on driver side door
tranny is starting to grind in 2nd and 3rd
asking 5000$ neg
don't hesitat to ask any questions
pm or come by laminar!
1991
165*** km's
5spd
awd tsi
anti rust each season
very clean
oil changes
-diff and transfer case (redline heavy shockproof)
-tranny (b&g synchroshift)
always run 94 octane from petro
new parts:
rad
all wheel bearings
both outer tie rods
front ball joints
kyb gr-2 (front)
altenator
mods:
eprom ecu
act 2600 clutch kit (about 5000 km's)
custom 3' turbo back
-vibrant stealth muffler
-2 moroso race bullets
-dejon tool 3' down pipe w/ wastgate dump
twin slimline electric fans
powerslot rotors
hawk pads
17' adr mags w/ hankook ventus 225/45/17 80% tread remaining
urathane front bushings
k&n fitler
custom intercooler piping(cold side)
new pioneer sound system(worth 1000)
extra parts included
stock rims w/ tires
new winter tires(toyo 90% tread left)
2 usable tranny cores w/ transfer cases
the bad
missing molding on driver side door
tranny is starting to grind in 2nd and 3rd
asking 5000$ neg
don't hesitat to ask any questions
pm or come by laminar!










Last edited: