Exhaust Bending Methods

Status
Not open for further replies.

RAWTEK

Shop Representative
Ram Style Bending:
Also known as press bending. This method of bending is used by most muffler shops and is the most restrictive. Material angles form as center axis advances toward two fixed outer points
rambendi.jpg


Rotary Draw Bending:
Material drawn through stationary counter bending die onto fixed radii former tooling to desired bend angle. This type of bending is used for smaller diameter tubing on a large centerline radius.
rotarydr.jpg


Mandrel Bending:This type of bending is the least restrictive and will give you the most performance. Materials supported internally and externally while being drawn thru counter bending die onto fixed radii tooling
mandrels.jpg


Ring Roll Bending:Material formed using lateral movement and center roll down feed pressure to achieve desired angles
ringroll.jpg
 
Status
Not open for further replies.
Back
Top