Part-out DMCC race car Carl Nadeau, high end parts

Status
Not open for further replies.

D-BOLT-T

Legacy Member
Nissan 240SX 1993 DMCC Drift Car PART OUT !!!

Engine :
-BRAND NEW !!!
-S14 with fonctionnal VTC
-Engine runs on pump gaz (94 octane), make 404 wheel horsepower at a super conservative 17 pounds of boost (big safety margin). We can go a lot more than that with race gaz, even with pump gaz.
-Full race preparation by TK race engines (cost in labour alone : 4000$ + 3000$ sponsored free)
Engine clean and inspect, bore and hone, deck bloc, line hone main, resurface head and block, full valve job, install new valves and new valve guides, balance and blueprint, ASS+bloc, DIS assy bloc, Ass head, Dis head, match head (2 races)
-Full balanced and blueprint (2 races)
-ARP studs (2 races)
-Greddy rocker arm stopper (2 races)
-New : water pump, seal valve intake, seal valve exhaust, front main seal, rear main seal, trottle body gasket, tensionner gasket, thermostat, oil filter,
-Cometic head gasket (2 races)
-Wiseco pistons 9 to 1 (2 races)
-Race bearings (2races)
-BC stainless valves intake and exhaust (2 races)
-BC 272 stage 3 cams (2 races)
-BC springs and retainers (2 races)
-Modified oil pump :
-BONUS: Kit gages Autometer Nexus serie comprenant: water temp, oil temp, oil press, boost, EGT (sans sensor), wideband (sans sensor).

!!!!Block et tête complet: 6500$!!!!


-Reinforced tubular headers (1 year)
-Garrett Hybrid GT2830 full ball bearing turbo (2 races)
-Oil restrictor (2 races)
Mégadeal: 1450$

-New down pipe and turbo outlet (2 races) : VENDU-SOLD

-Greddy intercooler mid mount avec piping (2 years) : VENDU-SOLD

-koyo radiator (only use distilled water and Motul MO COOL) (1 year) : 300$

-Tial wastegate 38mm (2 races) :?

-Blowoff greddy rs (1 year) : VENDU-SOLD

-Greddy boost controler (1 race) : VENDU-SOLD!!!

-AEM air filter (2 races) :?

-Stand alone computer (2 races) : vend seulement en package, sinon je garde


!!!!!!!! Package deal complet avec tout (moteur complet full monté, turbo, manifold, radiateur, wastegate, stand alone computer, filtre à air !!!): 8750$ Prix baissé, et un peu négociable




-Straight exhaust 3" with new high quality magnaflow exhaust (3 races) : Deal: 225$

Transmission :
-Kit Mazworks (300ZX transmission,
use only RedLine Shockproof oil). (full rebuilt 2008) : VENDU – SOLD !!!

-ATS & Across carbon clutch kit (SR20DET, S13 and S14), with aluminum flywheel (1 year) valeur de 1370 us$ : 600$ Négociable

Drivetrain other :
-Race axle (brand new 0 race) : 400$

-KAAZ limited slip differential (1 year) only use Motul @ 54$ a liter
-Short ratio gear for diff to 4-3 (1 race) (valeur de 550 us$)
-Déjà installé, et frais ajusté : !!!975$ DEAL!!!

Suspension :
-STD Suspension R7 Coil over, spring rate 8 front and 6 rear for traction, camber plates (1 year) valeur de 1890 us$ (2260$ + taxes) : MÉGADEAL: 1250$

-Seat rails (Buddy Club or Bride ?) : 175$ left and right

-Hub adaptor Momo 240SX 1989-1994 NEW IN BOX!!!: 65$

- Body :
The chassis as NO RUST, the frame is solid, an it is straight. It was imported from the states in March 2008 from Vaughn Gittin JR.
-Front fenders fiberglass
-Sleepy eye conversion, with fog lights instead of stock lights (weight reduction)
-Front wheels arch tubbed, new extended fiberglass rear quarter panels, new paint.
-Roll cage and spot welds by MA-Motorsports (Vaughn Gittin JR’s shop) (march 2008)
-Full gutted for weight reduction (april 2008)
-Master switch (april 2008)
-Traction rods front (adjustable caster)
-kit multilink Battle Version
-Tein tie rod (complete kit) new
-New stering rack with eurethane bushings (1 year)
-S14 Knuckles
Brakes :
-Rear brakes 300ZX (1 year), working e-brake cables, racing shoes and disc (Endless shoes, pads and discs)
-Brake line stainless
-300ZX fuel pump
-Power stering lines race MA-Motorsports pour swap SR20DET

!!!!Body complet (Châssis, ailes et quarters fibre, cage, master Switch, filage master Switch, batterie light weight, tables ajustables partout, S14 Knukkles, Brakes, ps line, etc...: !!!!!!!! 2900$




Inside :
-Painless kit (april 2008) : Vaut entre 800 et 1000$!!! DEAL 400$

-Sparco stering wheel (2 year) : VENDU-SOLD

AUTRES PIÈCES EN EXTRA :
*Intake Greddy SR20DET S13 complet: DEAL: 350$

*Mags Falken Hanabi 17 pouces bronze, 5 X 114 avec offset de 240SX, presque neufs, pneus Falken FK451 225-45-17 avant et 235-45-17 arrière, presque neufs aussi
http://www.falkentire.com/?#/Wheels/...gerCar/Hanabi:
MÉGADEAL: 750$

Vous pouvez me rejoindre par PM ou sur mon courriel: carlnadeau@hotmail.fr. Je vais traiter les demandes par ordre de réception, et surtout par ordre de paiements!!!

Carl
 
Last edited:
UPDATE

Voici ce qui reste, tous les prix sont baissés. C'est des sales deals pour des pièces de grosse qualité, et presque neuves!!!

Engine :
-BRAND NEW !!!
-S14 with fonctionnal VTC
-Engine runs on pump gaz (94 octane), make 404 wheel horsepower at a super conservative 17 pounds of boost (big safety margin). We can go a lot more than that with race gaz, even with pump gaz.
-Full race preparation by TK race engines (cost in labour alone : 4000$ + 3000$ sponsored free)
Engine clean and inspect, bore and hone, deck bloc, line hone main, resurface head and block, full valve job, install new valves and new valve guides, balance and blueprint, ASS+bloc, DIS assy bloc, Ass head, Dis head, match head (2 races)
-Full balanced and blueprint (2 races)
-ARP studs (2 races)
-Greddy rocker arm stopper (2 races)
-New : water pump, seal valve intake, seal valve exhaust, front main seal, rear main seal, trottle body gasket, tensionner gasket, thermostat, oil filter,
-Cometic head gasket (2 races)
-Wiseco pistons 9 to 1 (2 races)
-Race bearings (2races)
-BC stainless valves intake and exhaust (2 races)
-BC 272 stage 3 cams (2 races)
-BC springs and retainers (2 races)
-Modified oil pump :
-Greddy oil pan
-BONUS: Kit gages Autometer Nexus serie comprenant: water temp, oil temp, oil press, boost, EGT (sans sensor), wideband (sans sensor).

!!!!Block et tête complet: 6500$!!!!


-Reinforced tubular headers (1 year): 100$

-Stand alone computer (2 races) : vend seulement en package, sinon je garde

!!!!!!!! Package deal complet avec tout (moteur complet full monté, manifold, stand alone computer !!!): 7550$ Prix baissé, et un peu négociable

-Straight exhaust 3" with new high quality magnaflow exhaust (3 races) : Deal: 225$

Suspension :
-STD Suspension R7 Coil over, spring rate 8 front and 6 rear for traction, camber plates (1 year) valeur de 1890 us$ (2260$ + taxes) : MÉGADEAL: 1250$ NÉGOCIABLE

-Seat rails (Buddy Club or Bride ?) : 175$ left and right

-Hub adaptor Momo 240SX 1989-1994 NEW IN BOX!!!: 65$

- Body :
The chassis as NO RUST, the frame is solid, an it is straight. It was imported from the states in March 2008 from Vaughn Gittin JR.
-Front fenders fiberglass
-Sleepy eye conversion, with fog lights instead of stock lights (weight reduction)
-Front wheels arch tubbed, new extended fiberglass rear quarter panels, new paint.
-Roll cage and spot welds by MA-Motorsports (Vaughn Gittin JR’s shop) (march 2008)
-Full gutted for weight reduction (april 2008)
-Master switch (april 2008)
-Traction rods front (adjustable caster)
-kit multilink Battle Version
-Tein tie rod (complete kit) new
-New stering rack with eurethane bushings (1 year)
-S14 Knuckles
Brakes :
-Rear brakes 300ZX (1 year), working e-brake cables, racing shoes and disc (Endless shoes, pads and discs)
-Brake line stainless
-300ZX fuel pump
-Power stering lines race MA-Motorsports pour swap SR20DET

!!!!Body complet (Châssis, ailes et quarters fibre, cage, master Switch, filage master Switch, batterie light weight, tables ajustables partout, S14 Knukkles, Brakes, ps line, etc...: !!!!!!!! 2900$NÉGOCIABLE

Inside :
-Painless kit (april 2008) : Vaut entre 800 et 1000$!!! DEAL 400$

*Mags Falken Hanabi 17 pouces bronze, 5 X 114 avec offset de 240SX, presque neufs, pneus Falken FK451 225-45-17 avant et 235-45-17 arrière, presque neufs aussi
http://www.falkentire.com/?#/Wheels/...gerCar/Hanabi:
MÉGADEAL: 750$

Vous pouvez me rejoindre par PM ou sur mon courriel: carlnadeau@hotmail.fr. Je vais traiter les demandes par ordre de réception, et surtout par ordre de paiements!!!

Carl
 
Status
Not open for further replies.
Back
Top