My 4g63 GT42 Elantra

Status
Not open for further replies.

rick@garage16

Shop Representative
here is a few pictures of my race car Elantra with 4g63t Engine

Made 554hp on pump gas at 26 psi

ENGINE MODS :
4g63 6bolt Motor
Eagle Rods w/ARP Bolts
.020 Wiseco Pistons
ARP L19 Head Studs
Cometic Head Gasket
Ferrea SS Valves
Kiggly Valve Springs
Kiggly Steel Seats
Kiggly Racing Retainers
FP Race Cams
3G Lifters
Greddy Timing Belt

TURBO SET-UP:
Garage16 Custom Garrett GT42 Turbo
PR Performance Exhaust Manifold
Turbosmart 48mm Pro-Gate Wastegate
Turbosmart 50mm Raceport BOV
Wilson 75mm Throttle Body
Magnus Race Intake Manifold
3" Aluminum Piping
PWR Water-to-Air Cooler
Garage16 Ice Box
Garage16 Intake Gasket

ENGINE BOLT ON'S :
AEM Cam Gears
Fluidamper Crank Pulley
Yonaka Race Radiator
APEXi Radiator Cap
Spal 12" Fan
Garage16 Solid Engine Mounts
Electric CNR Water Pump

FUEL SYSTEM:
RCI Drag Cell
Bosch 044 Fuel Pump
2x Feed Lines
1600cc Injecters
Garage16 Fuel Rail
AEM Fuel Pressure Regulator
4x Earls Fuel Filters

ELECTRONICS SYSTEM:
AEM EMS
AEM Wideband
AEM EMS Data Gauges
MSD DIS-2
NGK Wires
NGK Plugs

DRIVETRAIN SYSTEM:
Shep Racing Stage 4 AWD Custom Transmission
KAAZ LSD
Quartermaster AWD Twin Disc
Driveshaft Shop Custom Axles
Weld Racing Magnum Rims (front)
Weld Draglite Rims (rear)
PR Performance Traction Bars
26" Hoosier Drag Slicks



I know there is ALOT of dsm guys in Montreal so I may just have to come there and race with you guys :)
 
DSC01261.jpg



10-1.jpg


ts2.jpg


2334628464_64d96ff42b.jpg


me.jpg
 
Funny to see another 4g63 awd elantra, but can you put pic and tell me why you use a gt42? It is a really big turbo, not very strretable and very tight under the hood of a dsm, probably more under the hood of an elantra.

Very nice ride, just saw the pic on the website, I wasn't sure of what you mean by race car.
 
Funny to see another 4g63 awd elantra, but can you put pic and tell me why you use a gt42? It is a really big turbo, not very strretable and very tight under the hood of a dsm, probably more under the hood of an elantra.

Very nice ride, just saw the pic on the website, I wasn't sure of what you mean by race car.


well its not a street car :)

as for fitting a gt42 well just lets say there is more room on a DSM then on a elantra.


oo its also a FWD car not a AWD...but I am using a AWD trans ;)
 
Phil, la elantra a neb était pas awd elle?

and why are you using an awd tranny in a fwd car only?

Serge and MononcTsi use a fwd tranny in there dragster and it seems to be fine enough for 8sec.


Good luck with the car.
 
well serge is running a auto trans and Im running 5spd shift one.


When I calle dup John Shep, he said you can only build a FWD good for 400hp and with a AWD you can found more parts for it and ALOT stronger :D



Thanks guys

I plan on going to MOntreal to meet some of you DSM guys
 
well serge is running a auto trans and Im running 5spd shift one.


When I calle dup John Shep, he said you can only build a FWD good for 400hp and with a AWD you can found more parts for it and ALOT stronger :D



Thanks guys

I plan on going to MOntreal to meet some of you DSM guys

Very nice care!*tu*

And we'll be very happy to see your car donw here and speak with you :bigup:
 
well serge is running a auto trans and Im running 5spd shift one.


When I calle dup John Shep, he said you can only build a FWD good for 400hp and with a AWD you can found more parts for it and ALOT stronger :D



Thanks guys

I plan on going to MOntreal to meet some of you DSM guys
Nice setup! :bigup:
You should register to dsmquebec.org that's where the real gang hang. :)
 
Only if I can post in English lol
Of course you can post in english. There is no restriction regarding that on dsmquebec. Agreed tough that 98% of the post are in french, but if you create a thread in english people will respond in english.

You will have access to the top dsm people in Canada. :bigup:
 
Status
Not open for further replies.
Back
Top