J's Racing Style Fiber Glass rear Diffuser

Teknotik.com

New member
We are very happy to announce the availability of the J's Racing Style Fiber glass diffuser. All our diffuser go through a very strict manufacturing process.

The manufacturing process is often neglected in replica parts. More often than not, quality is severely compromised for the sake of cutting costs. In our eyes, quality should never be a compromise.

The development of our part always begins with a high quality and high strength mold to maintain a pleasing aesthetic and the ability to maintain a perfect fitment. The lay-up process is meticulously hand-laid by experienced fabricators with 55yrs experience.The diffuser, being an aerodynamic component, needs to be as rigid as possible and that requirement has been addressed to surpass even the original part.

The part is composed of three complete layers (there is no chopper gun and no patch work) and each layer is rigorously rolled to remove all bubbles as well as minimizing the amount of resin needed to be used in order to reduce weight while maintaining strength. Attention to detail is very evident as each unit is hand crafted in North America.

The diffuser has been made utilizing an extremely high quality gel coat. This provides the part with a high gloss surface. This has two benefits:

1. Reduced time between purchase and installation

2. Money saved by not needing to pay to get the part painted

CCC_7167_-_small.jpg



In addition, the surface can be buffed and polished with a high speed polisher to bring up the shine even further. Whether that's necessary or not will be up to the end user as each piece is already polished with a high grade 3M buffing compound.


As you can see here the diffuser on the left is the original and the one on the right is the replica.

CCC_7165_-_small.jpg




dialdre.jpg


importfest3ys9.jpg



DSC_9690.jpg


JsracingDiffuserWM.jpg

*must be modified to fit s2000

We have these diffusers all in stock and ready to go. The diffuser is designed for RSX, however with modification it will fit other cars. We also have a demo diffuser for test fitting.

If you have any questions about this product please give us a call at the shop 416-907-3851 or stop by and check them out for yourself, you wont be disappointed!


Contact Info:
Phone Main: 416-907-3851
Phone 2: 647-344-6816
Phone (Dealer line): 416-751-1541
General Email: inquiry@teknotik.com
Eric: eric@teknotik.com
Jay: jay@teknotik.com
msn: 4nperformance@canada.com

Address, map and store hours can be found here: http://www.jdmrides.ca/forum/teknot...m-engines-installation-fabrication-t1575.html
 
Back
Top