X6M turbo

claude c

claude c

New member
Voivi un x6M twin turbo upgrade, c'est juste malade

[ame="http://www.youtube.com/watch?v=spH7tCN5dgg"]YouTube - turbo replacement for the BMW X6M[/ame]
 
La cie emotion wheel ont fitter le moteur x6m dans une m3:

A new tuner goes full spead ahead into the BMW tuning world and the results are quite impressive. The popular BMW M3 has its engine replaced by a tuned up version of the powerplant found in the BMW X6 M. The original M3 engine is a 4.0-liter naturally aspirated V8 developing maximum output of 414 horsepower and maximum torque of 400 N·m (300 lb·ft) at 3,900 rpm.

Emotion Wheels upgraded the 4.4 liter V8 twin-scroll engine from the X6 M and it now produces 707 horsepower. The upgrade was made with a few tricks to the turbocharged V8 engine and some slight adjustments made to the chassis and suspension in order to handle the powerful upgrade. They also installed a modified sport exhaust system that also contributes to this power boost a bit.

The tuner has not released any performance data for the car, but we expect it to be quite faster than the standard M3 which only needs 4.8 seconds to reach 62 mph (100 km/h) and offers an electronically limited top speed of 155 mph (250 km/h).



The Emotion Wheels BMW M3 E92 also received a couple of styling enhancements and it features a new carbon bonnet which weight only 8.6 kg and adds a great visual effect and new side sills.

A H&R suspension is fitted to lower the ride height. 19 inch Wasabi matte black alloys with polished outer ring are wrapped in high performance tires.

No pricing has been announced at this time.

http://www.bmwblog.com/wp-content/uploads/emotion-wheels_bmw_m3.jpg
 
Je ne connais pas encore les chiffres de ce turbo upgrade, mais un compressor wheel upgrade donne 724hp,

Le BMW X6M par Alsa Engineering :
A Abu Dhabi, le préparateur Alsa Automotive Engineering offre aussi une sacrée hausse de puissance à ce X6M. De quoi tirer un trait sur les 555 ch de série tirés du V8 4.4 TwinPower. Premier indice : le X6M stock abat le 0 à 100 km/h en 4,7 s. Revu par Alsa Automotive Engineering le mastodonte allemand accomplit le même exercice en 3,8 s…

… Demande 14,6 s pour passer de 0 à 200 km/h et revendiquerait ni plus ni moins que 325 km/h en vitesse de pointe. C’est que ce X6M préparé par Alsa Automotive Engineering avance une puissance de 724 ch (!) et 945 Nm de couple maximal.

la pression a été copieusement portée à 1,8 bars, une ligne d’échappement sport a été installée et l’ECU reprogrammée. Pour les clients de cette zone géographique, il leur faudra débourser quelques 15 000 euros pour la préparation moteur.


http://www.worldcarfans.com/1100630...-hp-out-of-bmw-x6-m-with-upgraded/lowphotos#1
http://www.worldcarfans.com/1100630...-hp-out-of-bmw-x6-m-with-upgraded/lowphotos#4
http://www.worldcarfans.com/1100630...-hp-out-of-bmw-x6-m-with-upgraded/lowphotos#3
http://www.worldcarfans.com/1100630...-hp-out-of-bmw-x6-m-with-upgraded/lowphotos#8
http://www.worldcarfans.com/1100630...-hp-out-of-bmw-x6-m-with-upgraded/lowphotos#6

[ame="http://www.youtube.com/watch?v=1Hy3UuTLfVw&feature=player_detailpage"]YouTube - ALSA X6 M on dyno makes 724 HP[/ame]
 
30% drive-train loss ? je suis le seul à trouver que c'est beaucoup ?


j'ai toujours vu entre 14-18% !
 
Je me suis fait passer par un X6M Noir qui transportait 2 motoneiges sur son trailer sur la 20!

je roulais 140... et quand il a clancher j'ai resté surpris en maudit!
 
You must log in or register to reply here.
Back
Top