2008 Jeep GC Overland CDI Differential Covers?

Do you guys know what diffs I have and what would you recomend for an after-market cover. I do not need anything bullet proof as I have full skid plates and do not go off road too far. I am interested in getting some better cooling for towing and easier drain fill. All without breaking the bank

Maybe Dana44 but i'm not sure. It give you an idea what to search for...

rear is dana44

Build sheet states the following:
5-Spd Auto W5J400 Transmission
Quadra-Trac II Full-Time, Active 4WD
200mm Front Axle, 3.73 Rear Axle Ratio
213mm Rear Axle
Elec LTD Slip Differential Rr/Frt Axle (I think this is what makes it a Quadra-Drive II System)
No mention of Dana 33/44 anywhere so I am at a loss.
Paulo at RIDZ thinks it is some Borg Warner Diff that no one makes covers for

sorry not dana44, maybe they are C213RE diffs front and back? (check dif type 3) they dont mention the 3.0 liter engine



Differential Type 1: Conventional (C213R)

Availability: Standard with 3.7 and 4.7-liter engines

Ring Gear Diameter: 8.3 in. (213mm)

Axle Ratios: 3.07:1 (3.7-liter); 3.73:1 (4.7-liter/5.7-liter)



Differential Type 2: Vari-Lock Progressive

Availability: Optional on 4 x 2 models

Ring Gear Diameter: 8.3 in. (213mm)

Axle Ratios: 3.07:1 (3.7-liter); 3.73:1 (4.7-liter/5.7-liter)




Differential Type 3: Electronic Limited Slip Differentials (ELSD) (C213RE)

Availability: Standard with 5.7-liter engine, Optional with 4.7-liter engine, Optional on 4 x 4 models with NV245 Transfer Case (Quadra-Drive II)

Ring Gear Diameter: 8.3 in. (213mm)

Axle Ratios: 3.73:1



Differential Type 4: Dana 44 (226RBI)

Availability: Standard with 6.1-liter engine (SRT8 only)

Ring Gear Diameter: 8.9" (226mm)

Axle Ratio: 3.73:1