Auto Laminar Dyno Tuned RSX-S (video)

Rsx type Smoke

New member
Just finished getting dyno tuned at Technika by Alex from Auto Laminar.
Auto Laminar + Hondata = WIN

Final numbers-
210.1 WHP
159.7 WTQ

Vtec @ 4900 rpm
Redline @ 8500 rpm
Launch Control @ 3600 rpm
Best E.T 1/4 mile 14.640 @ 96mph, no traction


b9213216.jpg

fc5390c3.jpg


my bumper after....
a369cb95.jpg

268d10be.jpg

50436fef.jpg

the car feels fantastic.
Big thanks to Louis at Technika and to Rob and Alex from Laminar, these guys are real pros.

For full Mod list and many pics:
http://montrealracing.com/forums/sh...st-Showoff-RSX-S-.Warning-NO-Rice!&highlight=
 
Last edited:
Glad to hear everything went well with your setup.
I did a complete engine rebuild of a b18c5 at Auto Laminar. Turned the key on start up and it constantly puffed smoke everywhere.
Rob sent the head out to get redone, and then tried to clip me for more cash. Being $12K+ down on this engine build already that wasn't going to happen.
Round two, head went back on....1000 kms later, the motor now burns 1L of oil every 500kms.
Instead of manning up and rectify the issue, he turns araound and tries to blame me for the poor workmanship and engine build.
Bunch of fail from my experience
 
im sure theres two sides to this story,
i dont even know you , but im sure Rob was right.
i could speak for myself and many others , Auto Laminar is very honest and proffessional .

now GTFO and stop shitting on other peoples threads.
 
^^ sérieux?? Jvx dire je rentrais 14.7 avec mon type-s 06 avec seulement un CAI.

Meilleur truc avec la type-s tu lauch ça à 2.5-3k max, j'ai fait ce temps la avec les tires 4 saisons stock, donc de la grosse bouette!
 
Back
Top