AEM Water-methanol Kit for sale with failsafe gauge.

cobrAAA

Shop Representative
Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:

What is included:

AEM Failsafe device with aem software for full tuning ability: retail 265$us
http://www.aemelectronics.com/water-methanol-failsafe-device-1-4-sae-1184

AEM Filter, but it has been over-tighted so unless you want to fix it with some sealant, jb weld, its no use: retail: 28$
http://www.aemelectronics.com/water-methanol-injection-filter-1161

AEM Nozzle with built-in check-valve, comes with 3 nozzles. retail : 58$
http://www.aemelectronics.com/water-methanol-injector-nozzle-kit-788

1 gallon AEM with Low-fluid sensor: retail 66$
http://www.aemelectronics.com/water-methanol-injection-1-gallon-tank-695

AEM progressive controller ( some wires might be cut and may need to be longer) : retail 150$
http://www.aemelectronics.com/1-gallon-water-methanol-injection-kit-691

AEM pump new -style: retail 130$
http://www.aemelectronics.com/recirculation-style-water-methanol-injection-pump-698

Total retail value: with pump : 697$ US. ( you can easily figure it will at least cost an extra 15% for shipping and tax/duties) so total cost of this kit is about 800$ish

The only thing missing in this kit will be the 10$ tubing!

I'm asking 650$ willing to part the kit, so just ask.
 
Kit water-meth.. 500$

Pump Coolingmist brand new
Hose
AEM Controller ( some wire were cut shorter)
Tank
AEM Filter ( plastic cracked not sure if you can seal it)
Aem USB-tuned ( but not obligated) flow gauge ( some wires were cut shorter)
Coolingmist low-level fluid ( not sure if can be used, bought broken like this)
AEM built-in checkvalve injector

dsc4054.jpg


dsc4057b.jpg


dsc4066l.jpg


dsc4058.jpg



dsc4056o.jpg


dsc4057fd.jpg


dsc4055a.jpg




Retail: the kit is worth 420 and the gauge 300 + shipping and yadayada, that's easily 800$. The kit haven't been used for one full tank and been removed. 500$ seems quite fair ( if you wish to replace the filter and filter, it will cost you 50$, still saving a nice 250$ off retail)

Apexi RSM: as you can see its in very good shape! barely any scratchs on the screen:

dsc4060p.jpg



dsc4061n.jpg


dsc4059c.jpg



Greddy Informeter, samething:

dsc4062l.jpg



dsc4064k.jpg
 
Back
Top