FS: Electronics + parts for RB /Nissan ( some are universal)

cobrAAA

Shop Representative
) OEM Transmission for BNR32 with transfer case, no shifter and fork, just the tranny and t-case*. It was said that the transmission was working but had a grind on the 4th when used on the drag. I didn't test it so I can't tell you. 150$

dsc3534n.jpg


dsc3533w.jpg


3) Brand new Nissan OEM Synchro kit (1-5) ; 200$
dsc2839y.jpg




7) Many car care products as you can see below:
http://montrealracing.com/forums/sh...g-products-**Aquapel-Makita-Zymol-Swissvax-**

8) Front GTR Sway bar ; 40$
dsc8532j.jpg



dsc8533b.jpg


9) CDT subwoofer 12 inch, take 600wrms. these thing are real SQ sub, very high-end stuff, I used to do sound competition. do not get some junk infinity sub for 100$ get the real thing!
150$ each, I have 3 of these ( retail is about 400$ each!)
ES-SQ1000.jpg



10) Mocal oil cooler 19 fin, brand new but one thread is screwed, so you need a machine shop to replace the an-10 thread. Asking 40$ retail for 180$
dsc2838e.jpg



15) Not working Blitz DD bov .. 20$
Tein tension rods 100$
dsc2826wq.jpg


17) Greddy boost sensor brand new: 50$
dsc2827r.jpg


18) gtr oem bov 20$
dsc2828y.jpg


19) top rad hose 20$
dsc2829z.jpg



21) mishimoto rad cap 19lbs. 20$
dsc2836m.jpg





24) AEM Water- methanol injection kit with failsafe gauge

Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:

What is included:

Pump Coolingmist brand new
Hose
AEM Controller ( some wire were cut shorter)
Tank
AEM Filter ( plastic cracked not sure if you can seal it)
Aem USB-tuned ( but not obligated) flow gauge ( some wires were cut shorter)
Coolingmist low-level fluid ( not sure if can be used, bought broken like this)
AEM built-in checkvalve injector

dsc4054.jpg


dsc4057b.jpg


dsc4066l.jpg


dsc4058.jpg



dsc4056o.jpg


dsc4057fd.jpg


dsc4055a.jpg



Retail: the kit is worth 420 and the gauge 300 + shipping and yadayada, that's easily 800$. The kit haven't been used for one full tank and been removed. 500$ seems quite fair ( if you wish to replace the filter and filter, it will cost you 50$, still saving a nice 250$ off retail)

I'm asking 200$ for the kit and 150$ for the gauge or 300$ for both.

25) Greddy informeter multi gauge display

I'm selling a greddy informeter touch with the non-obd sensor. These 2 items retail for about 550$ + tax + shipping so your good for 650ish once everything get to your door. I think my price is fair enough for something in very good shape.

I want 300$ for it.

I also have the non-obd sensor adapter in order to connect additional sensor to it. which retail for 175$ its brand new.

I have the greddy boost sensor which retail for 125$

Make me an offer on these 2 others items if you want them with the gauge.

dsc4062l.jpg


dsc4064k.jpg


I also have an aem wideband to go with it.


29) Denso Supra 280 lph fuel pump. Used for 3000ish km. retail : 280$

Asking 100$

30) Apexi RSM: as you can see its in very good shape! barely any scratchs on the screen:

Asking 150$ for both the g-sensor and RSM ( just the rsm retail easily for 250$)

dsc4060p.jpg



dsc4061n.jpg


dsc4059c.jpg


31) hks gt-ss twin setup

These turbos have about 10 000 km. Was using them at 17psi and 21 psi for the last month. Made 520whp at 21psi.

Very responsive, I keep getting comment on this.

This set comes with HKS uprated actuator . they are also ajustable. Retail price on these are 3300$ + shipping /duties. I end up paying very close to 4000$.

Asking 1600$ for the pair.



dsc4682l.jpg


dsc4683w.jpg


dsc4684z.jpg



dsc4685y.jpg


dsc4686f.jpg


dsc4687p.jpg


32) 3 inch Exhaust system:

3inch exhaust system:

RS*R downpipe : 300$
Vibrant Ultra-quiet resonator cat-delete: 175$ ( really stop raspy sound coming off the exhaust! I love this piece)
Catback include a welded magnaflow straight-flow muffler ( doesn't do much but I wanted to have 2 muffler) with RS*R SS line : 200$
Varex electric valve control wireless controller ( let you decide the sound of your exhaust) cannon-type ( this exhaust has a flange, its not welded: 500$

Or would do the whole line for 1000$.

33) OS GIKEN TS2BD come with Bearing and sleeve

Been used for about 10 000 kms but it has seen maybe 20 launch-ish. Plate are still in good shape with a thickness of about 3.65-70.

Asking 850$


35) G-sensor OEM. No red tube, this is 100% fonctionnal. I seen these going for over 500$ on ebay and brand new I heard is like +1500 lol!

Mine is 100% working. Asking 200$

36) AEM wideband sensor:

used for 1 weeks literally! 50$

37) Rad cooling panel : 120$

dsc5248t.jpg
 
Faites moi des offres, je dois déménager, ça doit bouger et j'ai besoins d'un nouveau laptop lol!
 
Hey, I'm interested in the GReddy Informeter. How exactly does it work and what are the sensors and information that it can show?
 
Back
Top