What did you do to your VW/Audi today?

6a45836185437e3374ff27e2141e0b73.jpg


Pas mal à look final look, première ''R400'' au canada? Il me reste à mettre les Skirts de R400 and she’s done! Pour les intéressés j’ai les bumpers de R à vendre, Spoiler de R400 avec exhaust stock reso delete. PM

Ma douce en action

 
Last edited:
Did a follow up session (which is part of installation of the ceramic coating) with the detailer that applied the Opti-coat Pro today, he also applied Optic-coat Pro the new wheels and showed my how to properly wash and dry the car using the Optic-coat products ("No Rinse" and "Opti-Seal"). Man I'm really impressed with this product, you pressure was it first (no soap) you wash it with "No Rinse" using foam sponge no downward pressure on the sponge, just push it across the surface, spray one squirt of Opti-Seal on the panel your washing, dry it a microfiber towel and your done. Whole process take 15 minute and the car looks like you just finished waxing it. Again well worth the money if anyone think of doing this, you'll have no regrets.

When I purchased the Audi had to mount a front plate but the car didn't have the OEM front plate mount, secondly I didn't really like the look of it either. The tow hook setup would have been ugly as well because of the front tow hook location, would have been a huge space behind the plate.

Tow hook on my son's Golf, would have even more pronounced on the Audi:

Front plate:


Found this bracket called "Sly Bracket" https://www.slybrackets.com/store/, it ships out of Honolulu, Hawaii. Very nice quality product, all stainless steel hardware, powder coat frame, blue locktite applied to critical fasteners and huge mount of flexibility, additional mounting spacers. Work perfectly for the location I was looking at for the plate.




Multiple mount adjustments and spacers:



I know you guy in Quebec don't need this but had to share in case someone wants to mount Euro bracket without drilling holes.
 
Last edited:
Did a follow up session (which is part of installation of the ceramic coating) with the detailer that applied the Opti-coat Pro today, he also applied Optic-coat Pro the new wheels and showed my how to properly wash and dry the car using the Optic-coat products ("No Rinse" and "Opti-Seal"). Man I'm really impressed with this product, you pressure was it first (no soap) you wash it with "No Rinse" using foam sponge no downward pressure on the sponge, just push it across the surface, spray one squirt of Opti-Seal on the panel your washing, dry it a microfiber towel and your done. Whole process take 15 minute and the car looks like you just finished waxing it. Again well worth the money if anyone think of doing this, you'll have no regrets.

When I purchased the Audi had to mount a front plate but the car didn't have the OEM front plate mount, secondly I didn't really like the look of it either. The tow hook setup would have been ugly as well because of the front tow hook location, would have been a huge space behind the plate.

Tow hook on my son's Golf, would have even more pronounced on the Audi:
[url]https://farm1.staticflickr.com/874/40856435674_fde8d6a812_k.jpg[/url]
Front plate:
[url]https://farm1.staticflickr.com/871/41450697941_a105e5bc2a_k.jpg[/url]

Found this bracket called "Sly Bracket" https://www.slybrackets.com/store/, it ships out of Honolulu, Hawaii. Very nice quality product, all stainless steel hardware, powder coat frame, blue locktite applied to critical fasteners and huge mount of flexibility, additional mounting spacers. Work perfectly for the location I was looking at for the plate.

[url]https://farm1.staticflickr.com/893/41567870791_c932462b09_k.jpg[/url]
[url]https://farm1.staticflickr.com/848/40856435954_c6f3266b5a_k.jpg[/url]

Multiple mount adjustments and spacers:
[url]https://farm1.staticflickr.com/913/40856436464_8c6f08cf17_k.jpg[/url]
[url]https://farm1.staticflickr.com/820/41567870951_806e002d58_k.jpg[/url]

I know you guy in Quebec don't need this but had to share in case someone wants to mount Euro bracket without drilling holes.

wont that plate block a lot of air flow to whatever is behind it? brake duct or cooler?
 
wont that plate block a lot of air flow to whatever is behind it? brake duct or cooler?

Yes but it's an additional coolant cooler, one on both sides, will monitor engine, were the plate was mount before it blocked the FMIC. So since there are three coolant radiators better there the previous location. Just hate the OEM plate mount
 
how much for spoiler? u have pics?

how much for catback... ill give u $100

You fucking kijiji lowballing master. I'll sell as a kit probably.. My car is not a 100% done.. As soon I'm happy with it i'll let you know.

R400 ça a pas été abandonné comme projet? Tu as pogné ça où les bumoers de r400?

ECSTuning.. l'enfer comme il avait de la job a faire.. Pas recommander au personne pas apte en bodywork mettons.

Et oui abandonné mais plusieurs sources aftermarket ont refait le kit

r400 is the new "thunder bunny" LOL

Fait pas ta pute. Don't hate me cause you ain't me
 
You fucking kijiji lowballing master. I'll sell as a kit probably.. My car is not a 100% done.. As soon I'm happy with it i'll let you know.



ECSTuning.. l'enfer comme il avait de la job a faire.. Pas recommander au personne pas apte en bodywork mettons
Ces des pièces oem ou du aftermarket baser sur la r400?

Sent from my G3223 using Tapatalk
 
Installed boost gauge into the vent on the Audi, I'd bought a used 034 Motorsport intake manifold boost tap so used that to tie int he plumbing, tied in the wiring into the engine fuse box since there was some spare used fuse slots.


 
Installed boost gauge into the vent on the Audi, I'd bought a used 034 Motorsport intake manifold boost tap so used that to tie int he plumbing, tied in the wiring into the engine fuse box since there was some spare used fuse slots.
[url]https://farm1.staticflickr.com/841/40876326704_59d0bb8754_k.jpg[/url]
[url]https://farm1.staticflickr.com/803/40876327044_66ecf04f81_k.jpg[/url]
[url]https://farm1.staticflickr.com/846/26719102537_3dd9024ecf_z.jpg[/url]
Aren't you scared that the boost gauge will block air flow to who ever sit in the passager seat?

Sent from my G3223 using Tapatalk
 
Aren't you scared that the boost gauge will block air flow to who ever sit in the passager seat?

Sent from my G3223 using Tapatalk

The vent pod used to mount the gauge still lets air thru (outer edge) so it's not like it's completely block off.
 
Last edited:
Back
Top