diagnostic
Legacy Member
part number 48.02.69
retail is 299.95$
Asking 150$ obo
Fits: 2009-11 Audi TTS (CDL), VW Golf R, 2006-07 Audi A3 2.0T FSI (BPY) with K04 conversion, 2008 Audi TT (8J) mfg. before 9/03/2007 2.0T FSI (BPY) with K04 conversion and 2006-08.5 2.0T FSI transverse engines (BPY) with K04 conversion.
Also fits: European Audi S3 (8P) 265HP (BHZ), VW Scirocco R, Golf V GTI Special Edition 230HP and Golf VI 35th Anniversary Edition
NOTE: This part only fits up to specific VIN range in 2007 for GTI MKV, Jetta V, 2008 EOS and Passat:
GTI MKV VIN up to 1K_7W129620
Jetta V VIN up to 1K_7_191156
EOS VIN up to 1F_8_001500
Passat VIN up to 3C_8E137353 and 3C_8P076055
For 2008 Audi A3, 2008 Audi TT mfg. after 9/03/2007 and 2007 Golf, Jetta and 2008 EOS and Passat vehicles with VIN after this range, use part number 48.02.70.
Another way to determine if this part is correct for your vehicle, you will need to look at your original discharge pipe. If the locking notches for the pipe's retaining clip are located at 12 o'clock and 6 o'clock positions, this is the correct part.
retail is 299.95$
Asking 150$ obo
Fits: 2009-11 Audi TTS (CDL), VW Golf R, 2006-07 Audi A3 2.0T FSI (BPY) with K04 conversion, 2008 Audi TT (8J) mfg. before 9/03/2007 2.0T FSI (BPY) with K04 conversion and 2006-08.5 2.0T FSI transverse engines (BPY) with K04 conversion.
Also fits: European Audi S3 (8P) 265HP (BHZ), VW Scirocco R, Golf V GTI Special Edition 230HP and Golf VI 35th Anniversary Edition
NOTE: This part only fits up to specific VIN range in 2007 for GTI MKV, Jetta V, 2008 EOS and Passat:
GTI MKV VIN up to 1K_7W129620
Jetta V VIN up to 1K_7_191156
EOS VIN up to 1F_8_001500
Passat VIN up to 3C_8E137353 and 3C_8P076055
For 2008 Audi A3, 2008 Audi TT mfg. after 9/03/2007 and 2007 Golf, Jetta and 2008 EOS and Passat vehicles with VIN after this range, use part number 48.02.70.
Another way to determine if this part is correct for your vehicle, you will need to look at your original discharge pipe. If the locking notches for the pipe's retaining clip are located at 12 o'clock and 6 o'clock positions, this is the correct part.
