mpcv2000
Moderator
So this car has been up for sale once here and on another board but owner removed it right away , I've known that car and owner before that time.
I can say I've been dreaming about that car for minimum 5 years and this without counting the first one I saw in 2007 that got me hooked .
This will be my 2nd V8 RX7 project , 1st was a FC LT1 T56 and both have been running cars ( this one is not right now but was not too long ago ) .
Like my other one I'll have to learn how to work on the car and hoping to have some spare time....lol
So this was earlier today August 15 2016 :
What I know is this ( might be slightly off ) but I'll update over times .
**Suspension chassis**
-( Wheel set # 1 ) Fast Wheels 17X8 35ET Yokohama S.Drive 255/40R17 & 17X9 35ET 275/40R17.
-( Wheel set # 2 ) 5Zigen FN01R-C 18X8.5 38ET Sumitomo HTR Z3 245/40ZR18 & 18X9.5 35ET 275/35ZR18.
-Suspension Koni Yellow avec spring HKS.
-Ligne à frein Russel stainless.
-Sway bar racing beat .
-Hawks HP Plus pads front and rear.( Oct 2016 changed for EBC Green Stuff brake pads )
-New eurethane differiential bushing
**Moteur Transmission fuel delivery**
-Samburg LS1 Mounting kit.
-Tremec T56 rebuilted in 2017 ( stock rear 4.10 ) .
-Pro 5.0 shifter
-Fidenza Aluminum flywheel 198571.
-CenterForce DF017010.
-Hinson Aluminium Driveshaft.
-Wilwood Clutch Master cylinder.
-USA Headers long tube Granny's Speed Shop.
-Mr.Gasket MLS exhaust manifold gaskets # 4805G
-Cat-Back Racing Beat 16427
-Moteur ls1 1997 casting # 12550592 tout monter en stud ARP crank, rod,tête et hone des cyl .
-Edelbrock RPM XT Cylinder heads.
-SLP Double timing chain.
-SLP Harmonic Damper.
-Thermostat 160 deg SLP.
-Mahle oil pump.
-Improved Racing Oil Baffle.
-Pushrod CompCams.
-Trunion rocker kit CompCams.
-Lifter ls7 Upgrade Béaring rocker et pushrod CompCams.
-Injecteur upgrade fast.
-Howe racing avec fan spal
-Pompe à gaz aeromotive avec régulateur ajustable.
-Anti fuel starvation kit in tank.
-MSD sparkplug wire.
-New water pump.
-Dakota Digital Interface.
-Custom made A/C kit using GM & Mazda parts.
-Custom made Air intake system.
-Aftermarket MAF housing.
-Dorman LS6 Intake 615-900
......A suivre
I can say I've been dreaming about that car for minimum 5 years and this without counting the first one I saw in 2007 that got me hooked .
This will be my 2nd V8 RX7 project , 1st was a FC LT1 T56 and both have been running cars ( this one is not right now but was not too long ago ) .
Like my other one I'll have to learn how to work on the car and hoping to have some spare time....lol
So this was earlier today August 15 2016 :
What I know is this ( might be slightly off ) but I'll update over times .
**Suspension chassis**
-( Wheel set # 1 ) Fast Wheels 17X8 35ET Yokohama S.Drive 255/40R17 & 17X9 35ET 275/40R17.
-( Wheel set # 2 ) 5Zigen FN01R-C 18X8.5 38ET Sumitomo HTR Z3 245/40ZR18 & 18X9.5 35ET 275/35ZR18.
-Suspension Koni Yellow avec spring HKS.
-Ligne à frein Russel stainless.
-Sway bar racing beat .
-Hawks HP Plus pads front and rear.( Oct 2016 changed for EBC Green Stuff brake pads )
-New eurethane differiential bushing
**Moteur Transmission fuel delivery**
-Samburg LS1 Mounting kit.
-Tremec T56 rebuilted in 2017 ( stock rear 4.10 ) .
-Pro 5.0 shifter
-Fidenza Aluminum flywheel 198571.
-CenterForce DF017010.
-Hinson Aluminium Driveshaft.
-Wilwood Clutch Master cylinder.
-USA Headers long tube Granny's Speed Shop.
-Mr.Gasket MLS exhaust manifold gaskets # 4805G
-Cat-Back Racing Beat 16427
-Moteur ls1 1997 casting # 12550592 tout monter en stud ARP crank, rod,tête et hone des cyl .
-Edelbrock RPM XT Cylinder heads.
-SLP Double timing chain.
-SLP Harmonic Damper.
-Thermostat 160 deg SLP.
-Mahle oil pump.
-Improved Racing Oil Baffle.
-Pushrod CompCams.
-Trunion rocker kit CompCams.
-Lifter ls7 Upgrade Béaring rocker et pushrod CompCams.
-Injecteur upgrade fast.
-Howe racing avec fan spal
-Pompe à gaz aeromotive avec régulateur ajustable.
-Anti fuel starvation kit in tank.
-MSD sparkplug wire.
-New water pump.
-Dakota Digital Interface.
-Custom made A/C kit using GM & Mazda parts.
-Custom made Air intake system.
-Aftermarket MAF housing.
-Dorman LS6 Intake 615-900
......A suivre