My experience with Momentum Motorsport

En!vy said:
Hey you guys at the Momentum Store, my aunt would like to know what day this year she should be mounting her Toyo R1Rs onto her Tercel for summer? Any suggestions?
Click to expand...
R1Rs work better under 10C + salt and ice patches, thrills and emotions guaranteed. I suggest Today
 
SilverViper said:
The only problem is that it is the uglier GT3 on the market.
Click to expand...
Mk1 996 was a good looking automobile though
db2e7363a4285028e4d065d3e168bb8f.jpg


Sent from my EML-L09 using Tapatalk
 
sgsr20 said:
C'est dans mon top 3 pour remplacer le S80. Tes impressions?

Sent from my EML-L09 using Tapatalk
Click to expand...
Le feeling est vraiment super. Steering et transmission sont vraiment bien, clutch un peu light à mon goût. Son incroyable évidement. Les bancs sont super et assez confortables. Ça parrait que le AWD est d'une autre époque, il est lent à embarquer. Le look de l'auto est super et c'est l'fun que ça attire juste le regard des connaisseurs.

All in all, vraiment une super voiture.

Mon conseil, si tu daily drive ça, cherche en une pas super mega top clean, ça vas te faire moins chier s'il lui arrive quelque chose. J'avais cherché la perle avec mon R32 mk5 et quand le monde ont commencés à l'accrocher au train ou à l'épicerie, c'est là que j'ai décidé que j'allais arrêter l'expérience parce que ca me faisais trop chier.
 
This. Une poque sur une aile et une tail light petée dans des parkings à DD mon R32 pendant 1 an. Me crisse toujours à l'autre bout en plus. Le monde s'en fout vraiment.
 
73vette said:
That depends if she is having them installed at our Mexico location or our Montreal location


Sent from my iPhone using Tapatalk
Click to expand...

Félécitation pour ton expension, maintenant tu vise l'Europe et L'australie ou la Chine et le japon ?

On se voit bientot Nick quand je sors mon bazou blanc , A+.
 
E46 M3 subframe mount job . You can clearly see the crescent shaped crack. First step grind away all the paint/urethane. Then drill the ends of the crack, slightly grind out the crack, weld the crack, grind smooth. Weld in plate. I'll update with in trunk welding and such
We will be installing a set of polyurethane subframe bushings as well.

a5b5aef5b2a4624635edbfe019e78e85.jpg
14b53bb88e97862f5d2f53fed6b00212.jpg
9fe31be836d99f0f5c60b3b8232f840d.jpg
 
Spring perch. Most over looked area on these cars. All urethane ground out , seam welded. Ground smooth to sorta look OE. Some red paint for bling
4590c16e435c9a5d1810a2c5c149bc57.jpg
 
Last edited:
^Nice work

I know the following question has been covered 230598475 on bimmerforums, but I want to ask the Momentum guys from experience they have seen on their customer's cars.

For N55 2015:
JB4?
Dinan?
Other?

The car is stock, and I am not looking for anything crazy, stage 1 is fine.

I also know BMW laval does Dinan and maintans the warranty with it installed

Recommendations?

(As for anything more than Stage 1, I'll probably change cars before I upgrade the downpipe, exhaust etc, so I don't think its worth it in my case)
 
android25ua said:
^Nice work

I know the following question has been covered 230598475 on bimmerforums, but I want to ask the Momentum guys from experience they have seen on their customer's cars.

For N55 2015:
JB4?
Dinan?
Other?

The car is stock, and I am not looking for anything crazy, stage 1 is fine.

I also know BMW laval does Dinan and maintans the warranty with it installed

Recommendations?

(As for anything more than Stage 1, I'll probably change cars before I upgrade the downpipe, exhaust etc, so I don't think its worth it in my case)
Click to expand...

BMW Laval is the only authorized Dinan supplier. You can get a G before and will install it if you wish, but it's a very simple installation
 
Faire changé des springs (drop) et aligné la voiture sur une golf 2018

Sa peut coûté combien environs? Je veut budgéter mon move.
(Par Pm si vous aimé mieux sa)
 
You must log in or register to reply here.
Back
Top