Cette Cage Est-elle Légale?/Legal Roll Cage?

Y'as zéro norme de la SAAQ pour les arceaux, tant que tu as pas touché aux systèmes de protections d'origine, ballons gonflables et barre de protection dans les pare-chocs et portes.

A ce que je sache entk...
 
mais un arceua de course n'est pas permis dans une voiture de rue?
Permis mais tu dois porter ta ceinture de sécurité original.

Un 5point ou autres n'est pas "street légal" comme ceinture.

Envoyé de mon Pixel en utilisant Tapatalk
 
si çà nuit pas pour embarquer et débarquer (side bars et front hoop) c'est généralement accepté. c'est toujours un peu a la discrétion de l'inspecteur.
 
GT3 996? Option OEM donc legal oui


Envoyé de mon iPhone en utilisant Tapatalk

That's not the Porsche Techquipment eisenmann manufactured roll bar. Worst case you can always remove it, its literally 4 bolts

79K for an 01 Turbo with some ruf doodads is a bit much when you can get a pristine 996 turbo with half the mileage for much less or better yet if you look a 997.1 Turbo
 
the ruf conversion done at Weissach and GTK in Van. cost $53k in parts alone (Ruf wheels and fresh Bridgestone rubber) in 2002

yes, Lauzon in Laval has a 911 turbo for $50k
 
the ruf conversion done at Weissach and GTK in Van. cost $53k in parts alone (Ruf wheels and fresh Bridgestone rubber) in 2002

yes, Lauzon in Laval has a 911 turbo for $50k
Yet they didn't bother getting the proper steering wheel or period correct factory nav. Sorry man but 53k in parts is meaningless now, its a 15 year old year 996T and justifying top dollar on a car with a bodykit is hard. Its nice yes but not worth that much over a pristine 996T which is what I'd take then visit Markski and Carnewal for goodies. Maybe a Turbo S?

FYI you can get those techquipment bars for like 500$ now.. Seats are around 1500-1700$ each..

As I said for that sorta money you are getting close to 997.1 money..
 
Back
Top