Want to put together an Obsessed Garage type Power Washer setup together, but ghetto

rollingsound

rollingsound

New member
Ok so my pump will be a Sun Joe SPX 3000, I want to have quick disconnects, a foam cannon, a long hose that is flexible, maybe 50 feet and a SHORT gun (swivel would be bonus).

Has anyone done this before? I'm looking for something cheap but that will not shit the bed in 6 months
 
I found driveclean.ca might just go less ghetto and buy the good shit and not deal with import duties etc with obsessed garage. Anyone ever order from them?
 
Check my garage thread. All with princess auto stuff.

https://www.montrealracing.com/forums/showthread.php?907215-Eratiks-garage/page2

79b9635f4d4ffdde7563755bd41c6d62.jpg


Faudrait je double check mais avec cette liste sur princess auto t'es pas mal proche de kit complet. J'avais acheté quand la hose et le reel était en spécial.

soit pas cheap sur la hose, ca fait la différence quand tu l'utilises.

Sku :
UGS: 5790142
UGS: 8258899
UGS: 8194482
UGS: 1292044
UGS: 8902298
UGS: 8514614
SKU: 8118564
SKU: 8032498

J'ai enlevé le quick connect sur le gun finalement, je m'en servait pas. Juste un sur la buse.

foam gun MATCC

hose a jardin + coupling (a gauche), coude en 90 entre ton fitting m22 et ton 3/8 NPT = Rona
 
Last edited:
e95294735cd82c9764e5a27f3e447937.jpg

0af3e460388444873dadd2b00e7a2e9c.jpg

3d3496d319589fcc6cc66825e6c925e3.jpg

01589493dadad24981ac4588cfe44040.jpg

4ab01bc20f19cac5c2848e662630f3b3.jpg


Jte conseille leur “chemical rack” aussi pour organizer produits/spray. Souvent en special a 12.50$

Les bouteilles spray viennent de la aussi. 1.25$ en special et compatible avec foam cannon!


Envoyé de mon iPhone en utilisant Tapatalk
 
Je te recommande vraiment le SGS28 comme gun. Certains ce trouve un gun a 50$ et mettent un fitting swivel a 60$. donc ceci revient moins cher et est beaucoup moins bulky et de meilleure qualité.
(fait juste chier que tu ne peux pas commander d'amazon.com a cause du COVID-19).
https://www.amazon.com/gp/product/B07PV4VKXK/

Ensuite une hose de qualité et tu peux cheaper sur le reste aussi.

Voici les quick que j'ai:
https://www.amazon.ca/gp/product/B07DTBC67D/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
(ma hose a pression a des fittings M22)
0
Foam Cannon, j'ai celui-ci qui inclut l'orifice a 1.1mm:
https://www.aliexpress.com/item/32734952638.html?spm=a2g0s.9042311.0.0.4b634c4dzf6ZrI

Optionnel
https://www.amazon.ca/gp/product/B01GHM2HV4/

https://www.amazon.ca/gp/product/B00GN51RB2/
 
Last edited:
eratik said:
Check my garage thread. All with princess auto stuff.

https://www.montrealracing.com/forums/showthread.php?907215-Eratiks-garage/page2

//uploads.tapatalk-cdn.com/20181231/79b9635f4d4ffdde7563755bd41c6d62.jpg

Faudrait je double check mais avec cette liste sur princess auto t'es pas mal proche de kit complet. J'avais acheté quand la hose et le reel était en spécial.

soit pas cheap sur la hose, ca fait la différence quand tu l'utilises.

Sku :
UGS: 5790142
UGS: 8258899
UGS: 8194482
UGS: 1292044
UGS: 8902298
UGS: 8514614
SKU: 8118564
SKU: 8032498

J'ai enlevé le quick connect sur le gun finalement, je m'en servait pas. Juste un sur la buse.

foam gun MATCC

hose a jardin + coupling (a gauche), coude en 90 entre ton fitting m22 et ton 3/8 NPT = Rona
Click to expand...

J'aime bien ta hose, c'est quoi le modele?
 
C’est de la hose goodyear qui avait ete en special buy chez princess. Bonne mais pas excellente
 
Ok I'm mostly set up, got the 50 foot kobrajet, QDs, an spx3000, the MTM Gun with the integrated swivel, Lance, the pf22.2 foam gun...
Now, I'm currently renting my place where I have my garage and and can't install into the wall, does anyone have any idea for a cart type solution for a hose reel or something that can sit on the floor?

Thanks for all the help
 
Check for moveable cart. There was one done on obssessed garage facebook page. Looked pretty nice
 
eratik said:
//uploads.tapatalk-cdn.com/20200330/e95294735cd82c9764e5a27f3e447937.jpg
//uploads.tapatalk-cdn.com/20200330/0af3e460388444873dadd2b00e7a2e9c.jpg
//uploads.tapatalk-cdn.com/20200330/3d3496d319589fcc6cc66825e6c925e3.jpg
//uploads.tapatalk-cdn.com/20200330/01589493dadad24981ac4588cfe44040.jpg
//uploads.tapatalk-cdn.com/20200330/4ab01bc20f19cac5c2848e662630f3b3.jpg

Jte conseille leur “chemical rack” aussi pour organizer produits/spray. Souvent en special a 12.50$

Les bouteilles spray viennent de la aussi. 1.25$ en special et compatible avec foam cannon!


Envoyé de mon iPhone en utilisant Tapatalk
Click to expand...

What specific hardware did you use to get the hose reel onto the wall. I'm going to be drilling into cement myself so it'll be sleeve anchors probably, but I want to know what size hardware you were able to get through the Power Fist Princess Auto's hose reel's mounting bracket please. I'm hoping to use 1/2 inch sleeve anchors since that's the one good masonry bit I have left lol!

AND sorry, almost forgot, the hose reel, the entry to it, what is it? 3/8's female or male? thanks
 
Last edited:
1/2” anchor? You plan to winch your car with it? Use 3/16 tapcon and it will be way overkill. Only 2 tapcon is enough but put 4 to hold the support better if you whish.
 
I,ve put 3/16 and its more than enough, you have 6 places to secure it. The inlet of the reel is 3/8 female if I remember correctly
 
Moi je voudrais me faire quelques chose comme ça mais avec une fiting qui va dehors, car je lave mon char en avant de ma porte de garage
 
Achète toi une hose plus longue. J’ai 50 pieds et je lave mon auto dehors pour éviter de mouiller le garage.
 
Ok I didn't want to leave the house so I used a hammer drill and 6 relatively short tapcons and washers I had on hand, seems solid and I'm renting my space so I can't take them out easy when I move out. It's pretty sick, I ran a separate hose to it so it's ready to go. I'll post pics later



20200410_154242.jpg
IMG_20200410_133440_01.jpg
20200410_154251.jpg
20200410_154256.jpg
20200410_154301.jpg




The rubberized hooks were there from a while ago, just added the reel. Installing the tapcons was a pain in the ass as the reel came built with loctite on the screws etc so I needed to use a ratchet with a philips head and have my gf literally push me against the wall a bit so I wouldn't cam out of the screw head (gigitty?). The important thing is the thing is up and solid. I got six feet of choonnnky hydraulic hose cut from Princess for like 2 bucks a foot, pretty good deal considering it's custom and the hose is insssane.
 
Last edited:
eratik said:
//uploads.tapatalk-cdn.com/20200330/e95294735cd82c9764e5a27f3e447937.jpg
//uploads.tapatalk-cdn.com/20200330/0af3e460388444873dadd2b00e7a2e9c.jpg
//uploads.tapatalk-cdn.com/20200330/3d3496d319589fcc6cc66825e6c925e3.jpg
//uploads.tapatalk-cdn.com/20200330/01589493dadad24981ac4588cfe44040.jpg
//uploads.tapatalk-cdn.com/20200330/4ab01bc20f19cac5c2848e662630f3b3.jpg

Jte conseille leur “chemical rack” aussi pour organizer produits/spray. Souvent en special a 12.50$

Les bouteilles spray viennent de la aussi. 1.25$ en special et compatible avec foam cannon!


Envoyé de mon iPhone en utilisant Tapatalk
Click to expand...


You got the part number for that rack?
 
You must log in or register to reply here.
Back
Top