LF: body shop overhaulin

AsunaMAXXX

Legacy Member
ya tu quelqu'un qui connais une place qui sont spécialiste dans le overhaulin ou restauration , mettre le frame sur une rotisserie , sand blaster , refaire l'acier, etc etc

exemple t'amene un monocoque stripper

dans la region de MTL ou rive-nord?
 
from what i understand he wants to just bring the frame. thats all. there is no tape to put, no parts to cover, etc. Just crazy sand blast, and paint.

It really shouldnt be that expensive.

Degrease, sandblast, paint.

hes just painting the frame, you shouldnt need to bondo anything. Its seems simple enough other than patch some places with rust.
 
from what i understand he wants to just bring the frame. thats all. there is no tape to put, no parts to cover, etc. Just crazy sand blast, and paint.

It really shouldnt be that expensive.

Degrease, sandblast, paint.

hes just painting the frame, you shouldnt need to bondo anything. Its seems simple enough other than patch some places with rust.

Dis toi que si il veut le faire restaurer c'est parce qu'il est magané, j'ai vu des char top clean rentrer au mediablast et ressortir troués a grandeur, et du metal work ca prends pas 10min faire une patch sur un body, il y a énormément de temps a mettre pour que ca soit bien fait.
Donc non c'est pas simplement Sandblast then paint, a moins qu'on parle d'une voiture 2010
 
non un autre que j'avais remonté vla 6 ans pour vendre a un ami , que j'ai finalement racheté parce que j'avais un attachement sentimentale envers la mécanique , c'était la mécanique que j'avais été sur le dyno de trac et fait 238whp en 2001
 
I would never sandblast a shell, media that gets in the cracks will be impossible to remove completly, your best bet is to send it to a solvent bath (aka acid dip) there are 2 places that I know that are large enought to do a shell and of and both are located in Ontario
 
Back
Top