Okay guys, pictures will follow when I get all my stuff together.
1) OEM Transmission for BNR32 with transfer case, no shifter and fork, just the tranny and t-case*. It was said that the transmission was working but had a grind on the 4th when used on the drag. I didn't test it so I can't tell you. 250$
2) Brand new Nismo pivot ball ; SOLD
3) Brand new Nissan OEM Synchro kit (1-5) ; 300$
4) Not oem DO-LUCK rear bumper for GTS ( not sure it would fit a GTR) : 350$
5) R34 reverse light with harness; 60$
6) AMS Brembo v-spec 324mm front rotor 2 piece, used about 5000km, in very good shape ; SOLD
8) Front GTR Sway bar ; 40$
9) CDT subwoofer 12 inch, take 600wrms. these thing are real SQ sub, very high-end stuff, I used to do sound competition. do not get some junk infinity sub for 100$ get the real thing!
200$ each, I have 3 of these ( retail is about 400$ each!)
10) Mocal oil cooler 19 fin, brand new but one thread is screwed, so you need a machine shop to replace the an-10 thread. 70$ retail for 180$
11) No name oil cooler 19 fin, brand new, an-10 50$
12) 2 aeroquip an-10 hose with 90 degrees fitting, fit a relocation kit down to the front bumper for an oil cooler setup. 100$ Retail : 180$
13) Greddy thermostat oil plate for nissan brand new. SOLD
14) Turbosmart DUAL PORT with mazda flange ( can be recir or atmo or both! very neat!) used maybe for a month or so.. SOLD
15) Not working Blitz DD bov .. 20$
16) Tein tension rod for BNR32 150$
17) Greddy boost sensor brand new: 70$
18) gtr oem bov 20$
19) top rad hose 20$
20) aeroquip -10 around 18 inch hose. 10$ or free if you buy the oil cooler setup:
21) mishimoto rad cap 19lbs. 20$
22) machining screw so you can delete the breather on top of rb26 to make it fit an-10 instead: 40$ for both
23) Sard 700cc low independance fuel injector
Used for about 4000 kms. 6x low independance, drop-in in the rb26 fuel rail ( not sure for the other)
Asking 550$ shipped.
24) AEM Water- methanol injection kit with failsafe gauge
Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:
What is included:
AEM Failsafe device with aem software for full tuning ability: retail 265$us
http://www.aemelectronics.com/water-methanol-failsafe-device-1-4-sae-1184
AEM Filter, but it has been over-tighted so unless you want to fix it with some sealant, jb weld, its no use: retail: 28$
http://www.aemelectronics.com/water-methanol-injection-filter-1161
AEM Nozzle with built-in check-valve, comes with 3 nozzles. retail : 58$
http://www.aemelectronics.com/water-methanol-injector-nozzle-kit-788
1 gallon AEM with Low-fluid sensor: retail 66$
http://www.aemelectronics.com/water-methanol-injection-1-gallon-tank-695
AEM progressive controller ( some wires might be cut and may need to be longer) : retail 150$
http://www.aemelectronics.com/1-gallon-water-methanol-injection-kit-691
AEM pump new -style: retail 130$
http://www.aemelectronics.com/recirculation-style-water-methanol-injection-pump-698
Total retail value: with pump : 697$ US. ( you can easily figure it will at least cost an extra 15% for shipping and tax/duties) so total cost of this kit is about 800$ish
The only thing missing in this kit will be the 10$ tubing!
I'm asking 650$
25) Greddy informeter multi gauge display
I'm selling a greddy informeter touch with the non-obd sensor. These 2 items retail for about 550$ + tax + shipping so your good for 650ish once everything get to your door. I think my price is fair enough for something in very good shape.
I want 400$ for it.
I also have the non-obd sensor adapter in order to connect additional sensor to it. which retail for 175$ its brand new.
I have the greddy boost sensor which retail for 125$
Make me an offer on these 2 others items if you want them with the gauge.
P.S:I also have the oil pressure and oil temp sensor + harness which is another 200$ + the wideant sensor and harness which is another 100$. However, I think I will keep these 3 sensors.
26) Torque split controller for skyline GTR AWD or gts-4
Just like this one, used for 1 summer. unit will come with cut wires.
Asking 200$
27) HKS Actuator ( was on a set of GT-SS) this is a pair. used for 5 000 kms. Asking 250$
28) I will also have a OS GIKEN TS2B for RB motor but I will wait till I see the condition of th eplate before putting a price.
29) Denso Supra 280 lph fuel pump. Used for 3000ish km. retail : 280$
Asking 150$
1) OEM Transmission for BNR32 with transfer case, no shifter and fork, just the tranny and t-case*. It was said that the transmission was working but had a grind on the 4th when used on the drag. I didn't test it so I can't tell you. 250$
2) Brand new Nismo pivot ball ; SOLD
3) Brand new Nissan OEM Synchro kit (1-5) ; 300$
4) Not oem DO-LUCK rear bumper for GTS ( not sure it would fit a GTR) : 350$
5) R34 reverse light with harness; 60$
6) AMS Brembo v-spec 324mm front rotor 2 piece, used about 5000km, in very good shape ; SOLD
8) Front GTR Sway bar ; 40$
9) CDT subwoofer 12 inch, take 600wrms. these thing are real SQ sub, very high-end stuff, I used to do sound competition. do not get some junk infinity sub for 100$ get the real thing!
200$ each, I have 3 of these ( retail is about 400$ each!)
10) Mocal oil cooler 19 fin, brand new but one thread is screwed, so you need a machine shop to replace the an-10 thread. 70$ retail for 180$
11) No name oil cooler 19 fin, brand new, an-10 50$
12) 2 aeroquip an-10 hose with 90 degrees fitting, fit a relocation kit down to the front bumper for an oil cooler setup. 100$ Retail : 180$
13) Greddy thermostat oil plate for nissan brand new. SOLD
14) Turbosmart DUAL PORT with mazda flange ( can be recir or atmo or both! very neat!) used maybe for a month or so.. SOLD
15) Not working Blitz DD bov .. 20$
16) Tein tension rod for BNR32 150$
17) Greddy boost sensor brand new: 70$
18) gtr oem bov 20$
19) top rad hose 20$
20) aeroquip -10 around 18 inch hose. 10$ or free if you buy the oil cooler setup:
21) mishimoto rad cap 19lbs. 20$
22) machining screw so you can delete the breather on top of rb26 to make it fit an-10 instead: 40$ for both
23) Sard 700cc low independance fuel injector
Used for about 4000 kms. 6x low independance, drop-in in the rb26 fuel rail ( not sure for the other)
Asking 550$ shipped.
24) AEM Water- methanol injection kit with failsafe gauge
Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:
What is included:
AEM Failsafe device with aem software for full tuning ability: retail 265$us
http://www.aemelectronics.com/water-methanol-failsafe-device-1-4-sae-1184
AEM Filter, but it has been over-tighted so unless you want to fix it with some sealant, jb weld, its no use: retail: 28$
http://www.aemelectronics.com/water-methanol-injection-filter-1161
AEM Nozzle with built-in check-valve, comes with 3 nozzles. retail : 58$
http://www.aemelectronics.com/water-methanol-injector-nozzle-kit-788
1 gallon AEM with Low-fluid sensor: retail 66$
http://www.aemelectronics.com/water-methanol-injection-1-gallon-tank-695
AEM progressive controller ( some wires might be cut and may need to be longer) : retail 150$
http://www.aemelectronics.com/1-gallon-water-methanol-injection-kit-691
AEM pump new -style: retail 130$
http://www.aemelectronics.com/recirculation-style-water-methanol-injection-pump-698
Total retail value: with pump : 697$ US. ( you can easily figure it will at least cost an extra 15% for shipping and tax/duties) so total cost of this kit is about 800$ish
The only thing missing in this kit will be the 10$ tubing!
I'm asking 650$
25) Greddy informeter multi gauge display
I'm selling a greddy informeter touch with the non-obd sensor. These 2 items retail for about 550$ + tax + shipping so your good for 650ish once everything get to your door. I think my price is fair enough for something in very good shape.
I want 400$ for it.
I also have the non-obd sensor adapter in order to connect additional sensor to it. which retail for 175$ its brand new.
I have the greddy boost sensor which retail for 125$
Make me an offer on these 2 others items if you want them with the gauge.
P.S:I also have the oil pressure and oil temp sensor + harness which is another 200$ + the wideant sensor and harness which is another 100$. However, I think I will keep these 3 sensors.
26) Torque split controller for skyline GTR AWD or gts-4
Just like this one, used for 1 summer. unit will come with cut wires.
Asking 200$
27) HKS Actuator ( was on a set of GT-SS) this is a pair. used for 5 000 kms. Asking 250$
28) I will also have a OS GIKEN TS2B for RB motor but I will wait till I see the condition of th eplate before putting a price.
29) Denso Supra 280 lph fuel pump. Used for 3000ish km. retail : 280$
Asking 150$
